Bioactive glass - Related Links

Bioactive glass

Bioactive glasses are a group of surface reactive glass-ceramic biomaterials and include the original bioactive glass, Bioglass. The biocompatibility of these glasses has led them to be investigated extensively for use as implant materials in the human body to repair and replace diseased or damaged bone.


Larry Hench and colleagues at the University of Florida first developed these materials in the late 1960s and they have been further developed by his research team at the Imperial College London and other researchers worldwide.


There have been many variations on the original composition which was Food and Drug Administration (FDA) approved and termed Bioglass. This composition is known as 45S5. Other compositions are in the list below.

Mechanism of bioactivity

The underlying mechanisms that enable bioactive glasses to act as materials for bone repair have been investigated since the first work of Hench et al. at the University of Florida. Early attention was paid to changes in the bioactive glass surface. Five inorganic reaction stages are commonly thought to occur when a bioactive glass is immersed in a physiological environment:

1) Ion exchange in which modifier cations (mostly Na+) in the glass exchange with hydronium ions in the external solution.

2) Hydrolysis in which Si-O-Si bridges are broken, forming Si-OH silanol groups, and the glass network is disrupted.

3) Condensation of silanols in which the disrupted glass network changes its morphology to form a gel-like surface layer, depleted in sodium and calcium ions.

4) Precipitation in which an amorphous calcium phosphate layer is deposited on the gel.

5) Mineralization in which the calcium phosphate layer gradually transforms into crystalline hydroxyapatite, that mimics the mineral phase naturally contained with vertebrate bones.

Later, it was discovered that the morphology of the gel surface layer was a key component in determining the bioactive response. This was supported by studies on bioactive glasses derived from sol-gel processing. Such glasses could contain significantly higher concentrations of SiO2 than traditional melt-derived bioactive glasses and still maintain bioactivity (i.e., the ability to form a mineralized hydroxyapatite layer on the surface). The inherent porosity of the sol-gel-derived material was cited as a possible explanation for why bioactivity was retained, and often enhanced with respect to the melt-derived glass.

Subsequent advances in DNA microarray technology enabled an entirely new perspective on the mechanisms of bioactivity in bioactive glasses. Previously, it was known that a complex interplay existed between bioactive glasses and the molecular biology of the implant host, but the available tools did not provide a sufficient quantity of information to develop a holistic picture. Using DNA microarrays, researchers are now able to identify entire classes of genes that are regulated by the dissolution products of bioactive glasses, resulting in the so-called "genetic theory" of bioactive glasses. The first microarray studies on bioactive glasses demonstrated that genes associated with osteoblast growth and differentiation, maintenance of extracellular matrix, and promotion of cell-cell and cell-matrix adhesion were up-regulated by conditioned cell culture media containing the dissolution products of bioactive glass.


Solid state NMR spectroscopy has been very useful in elucidating the structure of amorphous solids. Bioactive glasses have been studied by 29Si and 31P solid state MAS NMR spectroscopy. The chemical shift from MAS NMR is indicative of the type of chemical species present in the glass. The 29Si MAS NMR spectroscopy showed that Bioglass 45S5 was a Q2 type-structure with a small amount of Q3 ; i.e., silicate chains with a few crosslinks. The 31P MAS NMR revealed predominately Q0 species; i.e., PO43−; subsequent MAS NMR spectroscopy measurements have shown that Si-O-P bonds are below detectable levels [1]

Medical applications

Bioactive glasses have many applications but these are primarily in the areas of bone repair and bone regeneration via tissue engineering:[2]

  • Synthetic bone graft materials for general orthopaedic, craniofacial (bones of the skull and face), maxillofacial and periodontal (the bone structure that supports teeth) repair. These are available to surgeons in a particulate form
  • Cochlear implants
  • Bone tissue engineering scaffolds. These are being investigated in many forms, in particular as porous (contains pores into which cells can grow and fluids can travel) 3-dimensional scaffolds
  • Treating dentine hypersensitivity and promoting enamel remineralization

See also


  1. ^ Pedone, A; Charpentier T; Malavasi G; Menziani M C (2010). "New Insights into the Atomic Structure of 45S5 Bioglass by Means of Solid-State NMR Spectroscopy and Accurate First-Principles Simulations". Chem. Mater. 22 (19): 5644–5652. doi:10.1021/cm102089c. 
  2. ^ Lockyer, MWG; Holland D; Dupree R (1995). "NMR investigation of the structure of some bioactive and related glasses". J. Non-Crys. Sol. 188 (3): 207–219. doi:10.1016/0022-3093(95)00188-3.