This page is a soft redirect. Names
This page is a soft redirect. Identifiers#REDIRECTmw:Help:Magic words#Other
This page is a soft redirect.-
This page is a soft redirect. Properties
4.72 g/100 mL (20 °C)
5.7 g/100 mL (25 °C)
19.10 g/100 mL (80 °C)
27.53 g/100 mL (100 °C)
moderately soluble in pyridine
very slightly soluble in acetone
This page is a soft redirect. Structure
This page is a soft redirect. Hazards
This page is a soft redirect.- #REDIRECTmw:Help:Magic words#Other
This page is a soft redirect. SDS #REDIRECTmw:Help:Magic words#Other
This page is a soft redirect. External SDS #REDIRECTmw:Help:Magic words#Other
This page is a soft redirect.-
This page is a soft redirect. Related compounds
This page is a soft redirect. Supplementary data page#REDIRECTmw:Help:Magic words#Other
This page is a soft redirect.- #REDIRECTmw:Help:Magic words#Other
This page is a soft redirect. #REDIRECTmw:Help:Magic words#Other
This page is a soft redirect.
This page is a soft redirect.
Boric acid, also called hydrogen borate, boracic acid, orthoboric acid and acidum boricum, is a weak, monobasic Lewis acid of boron often used as an antiseptic, insecticide, flame retardant, neutron absorber, or precursor to other chemical compounds. It has the chemical formula H3BO3 (sometimes written B(OH)3), and exists in the form of colorless crystals or a white powder that dissolves in water. When occurring as a mineral, it is called sassolite.
Boric acid, or sassolite, is found natively in its free state in some volcanic districts, for example, in the Italian region of Tuscany, the Lipari Islands and the US state of Nevada. In these volcanic settings it issues, mixed with steam, from fissures in the ground. It is also found as a constituent of many naturally occurring minerals – borax, boracite, boronatrocaicite and colemanite. Boric acid and its salts are found in seawater. It is also found in plants, including almost all fruits.
Boric acid was first prepared by Wilhelm Homberg (1652–1715) from borax, by the action of mineral acids, and was given the name sal sedativum Hombergi ("sedative salt of Homberg"). However borates, including boric acid, have been used since the time of the Greeks for cleaning, preserving food, and other activities.
- Na2B4O7·10H2O + 2 HCl → 4 B(OH)3 [or H3BO3] + 2 NaCl + 5 H2O
- B2H6 + 6 H2O → 2 B(OH)3 + 6 H2
- BX3 + 3 H2O → B(OH)3 + 3 HX (X = Cl, Br, I)
Boric acid is soluble in boiling water. When heated above 170 °C, it dehydrates, forming metaboric acid (HBO2):
- H3BO3 → HBO2 + H2O
Metaboric acid is a white, cubic crystalline solid and is only slightly soluble in water. Metaboric acid melts at about 236 °C, and when heated above about 300 °C further dehydrates, forming tetraboric acid or pyroboric acid (H2B4O7):
- 4 HBO2 → H2B4O7 + H2O
The term boric acid may sometimes refer to any of these compounds. Further heating leads to boron trioxide.
- H2B4O7 → 2 B2O3 + H2O
There are conflicting interpretations for the origin of the acidity of aqueous boric acid solutions. Raman spectroscopy of strongly alkaline solutions has shown the presence of B(OH)Script error: No such module "Su". ion, leading some to conclude that the acidity is exclusively due to the abstraction of OH− from water:
- B(OH)3 + H2O 15px B(OH)Script error: No such module "Su". + H+ (K = 7.3x10−10; pK = 9.14)
or more properly expressed in the aqueous solution:
- B(OH)3 + 2 H2O 15px B(OH)Script error: No such module "Su". + H3O+
However other sources say that boric acid is also a tribasic Brønsted acid, with successive ionization steps:
- B(OH)3 15px BO(OH)Script error: No such module "Su". + H+ (Ka1 = 5.8x10−10; pKa1 = 9.24)
- BO(OH)Script error: No such module "Su". 15px BO2(OH)2− + H+ (Ka2 = 4x10−13; pKa2 = 12.4)
- BO2(OH)2− 15px BOScript error: No such module "Su". + H+ (Ka3 = 4x10−14; pKa3 = 13.3)
Since the value of Ka1 is comparable to that of the reaction with OH−, the concentrations of BO(OH)Script error: No such module "Su". and B(OH)Script error: No such module "Su". are similar.
- 4[B(OH)4]− + 2H+ 15px [B4O5(OH)4]2− + 7H2O
Boric acid makes an important contribution to the absorption of low frequency sound in seawater.
With polyhydric alcohols such as glycerol and mannitol the acidity of is increased. With mannitol for example the pK decreases to 5.15. This is due to the formation of a chelate, [((OH)4C6H8O2)2B]−, and this feature is used in analytical chemistry.
Boric acid dissolves and acts as a strong base in anhydrous sulfuric acid:
- B(OH)3 + 6H2SO4 → 3H3O+ + 2HSO4− + B(HSO4)4−
- B(OH)3 + 3 ROH → B(OR)3 +3 H2O
Crystalline boric acid consists of layers of B(OH)3 molecules held together by hydrogen bonds. The B-O bond length is 136 pm and the O-H is 97 pm with a hydrogen bond of 272pm. The distance between two adjacent layers is 318 pm.
allows boric acid molecules to form
parallel layers in the solid state
Based on mammalian median lethal dose (LD50) rating of 2,660 mg/kg body mass, boric acid is poisonous if taken internally or inhaled in large quantities. The Thirteenth Edition of the Merck Index indicates that the LD50 of boric acid is 5.14 g/kg for oral dosages given to rats, and that 5 to 20 g/kg has produced death in adult humans. For comparison's sake, the LD50 of salt is reported to be 3.75 g/kg in rats according to the Merck Index. But this is highly misleading, as humans have been known to die from amounts only a small fraction of the LD50. "The minimal lethal dose of ingested boron (as boric acid) was reported to be 2–3 g in infants, 5–6 g in children, and 15–20 g in adults", according to the Agency for Toxic Substances and Disease Registry.
Long term exposure to boric acid may be of more concern, causing kidney damage and eventually kidney failure (see links below). Although it does not appear to be carcinogenic, studies in dogs have reported testicular atrophy after exposure to 32 mg/kg bw/day for 90 days. This level is far lower than the LD50.
According to boric acid IUCLID Dataset published by the European Commission, boric acid in high doses shows significant developmental toxicity and teratogenicity in rabbit, rat, and mouse fetuses as well as cardiovascular defects, skeletal variations, mild kidney lesions. As a consequence, in August 2008, in the 30th ATP to EU directive 67/548/EEC, the EC decided to amend its classification as reprotoxic category 2 and to apply the risk phrases R60 (may impair fertility) and R61 (may cause harm to the unborn child).
At a recent European Diagnostics Manufacturing Association (EDMA) Meeting, several new additions to the Substance of Very High Concern (SVHC) candidate list in relation to the Registration, Evaluation, Authorisation and restriction of Chemicals Regulations 2007 (REACH) were discussed. The registration and review completed as part of REACH has meant the current classification of Boric Acid CAS 10043-35-3 / 11113-50-1 as of 1 December 2010 will be listed as H360FD (May damage fertility. May damage the unborn child.)
Boric acid can be used as an antiseptic for minor burns or cuts and is sometimes used in dressings or salves. Boric acid is applied in a very dilute solution as an eye wash. Dilute boric acid can be used as a vaginal douche to treat bacterial vaginosis due to excessive alkalinity, as well as candidiasis due to non-albicans candida. As an antibacterial compound, boric acid can also be used as an acne treatment. It is also used as prevention of athlete's foot, by inserting powder in the socks or stockings, and in alcohol solution can be used to treat some kinds of otitis externa (ear infection) in both humans and animals. The preservative in urine sample bottles in the UK is boric acid.
Boric acid solutions used as an eye wash or on abraded skin are known to be toxic, particularly to infants, especially after repeated use; this is because of its slow elimination rate.
Boric acid was first registered in the US as an insecticide in 1948 for control of cockroaches, termites, fire ants, fleas, silverfish, and many other insects. The product is generally considered to be safe to use in household kitchens to control cockroaches and ants. It acts as a stomach poison affecting the insects' metabolism, and the dry powder is abrasive to the insects' exoskeletons.
In combination with its use as an insecticide, boric acid also prevents and destroys existing wet and dry rot in timbers. It can be used in combination with an ethylene glycol carrier to treat external wood against fungal and insect attack. It is possible to buy borate-impregnated rods for insertion into wood via drill holes where dampness and moisture is known to collect and sit. It is available in a gel form and injectable paste form for treating rot affected wood without the need to replace the timber. Concentrates of borate-based treatments can be used to prevent slime, mycelium, and algae growth, even in marine environments.
Boric acid in equilibrium with its conjugate base the borate ion is widely used (in the concentration range 50 - 100 ppm boron equivalents) as a primary or adjunct pH buffer system in swimming pools. Boric acid is a weak acid, with pKa (the pH at which buffering is strongest because the free acid and borate ion are in equal concentrations) of 9.24 in pure water at 25 °C. But apparent pKa is substantially lower in swimming pool or ocean waters because of interactions with various other molecules in solution. It will be around 9.0 in a salt-water pool. No matter which form of soluble boron is added, within the acceptable range of pH and boron concentration for swimming pools, boric acid is the predominant form in aqueous solution, as shown in the accompanying figure. The boric acid - borate system can be useful as a primary buffer system (substituting for the bicarbonate system with pKa1 = 6.0 and pKa2 = 9.4 under typical salt-water pool conditions) in pools with salt-water chlorine generators that tend to show upward drift in pH from a working range of pH 7.5 - 8.2. Buffer capacity is greater against rising pH (towards the pKa around 9.0), as illustrated in the accompanying graph. The use of boric acid in this concentration range does not allow any reduction in free HOCl concentration needed for pool sanitation, but it may add marginally to the photo-protective effects of cyanuric acid and confer other benefits through anti-corrosive activity or perceived water softness, depending on overall pool solute composition.
Colloidal suspensions of nanoparticles of boric acid dissolved in petroleum or vegetable oil can form a remarkable lubricant on ceramic or metal surfaces with a coefficient of sliding friction that decreases with increasing pressure to a value ranging from 0.10 to 0.02. Self-lubricating H3BO3 films result from a spontaneous chemical reaction between water molecules and B2O3 coatings in a humid environment. In bulk-scale, an inverse relationship exists between friction coefficient and Hertzian contact pressure induced by applied load.
Boric acid is used in some nuclear power plants as a neutron poison. The boron in boric acid reduces the probability of thermal fission by absorbing some thermal neutrons. Fission chain reactions are generally driven by the probability that free neutrons will result in fission and is determined by the material and geometric properties of the reactor. Natural boron consists of approximately 20% boron-10 and 80% boron-11 isotopes. Boron-10 has a high cross-section for absorption of low energy (thermal) neutrons. By increasing boric acid concentration in the reactor coolant, the probability that a neutron will cause fission is reduced. Changes in boric acid concentration can effectively regulate the rate of fission taking place in the reactor. Boric acid is used only in pressurized water reactors (PWRs) (boiling water reactors (BWRs) use Sodium Pentaborate for the same purpose). Boric acid may be dissolved in spent fuel pools used to store spent fuel elements. The concentration is high enough to keep neutron multiplication at a minimum. Boric acid was dumped over Reactor 4 of the Chernobyl Nuclear Power Plant after its meltdown to prevent another reaction from occurring.
The primary industrial use of boric acid is in the manufacture of monofilament fiberglass usually referred to as textile fiberglass. Textile fiberglass is used to reinforce plastics in applications that range from boats, to industrial piping to computer circuit boards.
In electroplating, boric acid is used as part of some proprietary formulas. One such known formula calls for about a 1 to 10 ratio of Template:Chem/atomTemplate:Chem/atomTemplate:Chem/atomTemplate:Chem/atom to [[nickel(II) sulfate|Template:Chem/atomTemplate:Chem/atom]], a very small portion of sodium lauryl sulfate and a small portion of [[sulfuric acid|Template:Chem/atomTemplate:Chem/atomTemplate:Chem/atomTemplate:Chem/atom]].
Boric acid, mixed with borax (sodium tetraborate decahydrate) at the weight ratio of 4:5, is highly soluble in water, though they are not so soluble separately. The solution is used for fire retarding agent of wood by impregnation.
Boric acid is one of the most commonly used substances that can neutralize active hydrofluoric acid (HF). It works by forcing the free F− anions into complex salts. This process defeats the extreme toxicity of hydrofluoric acid, particularly its ability to sequester ionic calcium from blood serum which can lead to cardiac arrest and bone decomposition; such an event can occur from just minor skin contact with HF.
Boron is used in pyrotechnics to prevent the amide-forming reaction between aluminum and nitrates. A small amount of boric acid is added to the composition to neutralize alkaline amides that can react with the aluminum.
- Allen, A. H.; Tankard, A. R. (1904). "The Determination of Boric Acid in Cider, Fruits, etc.". Analyst 29 (October): 301–304. doi:10.1039/an9042900301.
- Housecroft, C. E.; Sharpe, A. G. (2008). "Chapter 13: The Group 13 Elements". Inorganic Chemistry (3rd ed.). Pearson. p. 340. ISBN 978-0-13-175553-6.
- Jolly, W. L. (1984). Modern Inorganic Chemistry. McGraw-Hill. p. 198.
- Housecroft, C.E.; Sharpe, A.G. (2005). Inorganic Chemistry (2nd ed.). Pearson Prentice-Hall. pp. 314–5.
- Comprehensive Chemistry for JEE Advanced 2014, p15.5
- Competition Science Vision
- Perelygin, Yu. P.; Chistyakov, D. Yu. (2006). "Boric acid" (PDF). Russian Journal of Applied Chemistry (Pleiades Publishing) 79 (12): 2041–2042. ISSN 1070-4272. doi:10.1134/S1070427206120305. Retrieved 29 August 2013.
- "Underlying Physics and Mechanisms for the Absorption of Sound in Seawater". National Physical Laboratory. Retrieved 2008-04-21.
- Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 0080379419.
- Brown, Herbert C.; Mead, Edward J.; Shoaf, Charles J. (1956). "Convenient Procedures for the Preparation of Alkyl Borate Esters". J. Am. Chem. Soc 78 (15): 3613–3614. doi:10.1021/ja01596a015.
- HHS, Public Health Service, Agency for Toxic Substances and Disease Registry (November 2010), Toxicological Profile for Boron (PDF), p. 11
- Office of Prevention, Pesticides and Toxic Substances (2006). "Report of the Food Quality Protection Act (FQPA) Tolerance Reassessment Eligibility Decision (TRED) for Boric Acid/Sodium Borate Salts" (PDF). United States Environmental Protection Agency. Retrieved 2008-04-21.
- ECB. "Boric Acid IUCLID Dataset" (PDF). European Commission.
- "Boric acid, ACC# 03260 MSDS" (PDF). 11 February 2008. Retrieved 2009-09-24.
- Ishii, Y.; Fujizuka, N.; Takahashi, T. et al. (1993). "A Fatal Case of Acute Boric Acid Poisoning". Clinical Toxicology 31 (2): 345–352. PMID 8492348. doi:10.3109/15563659309000402.
- = Restuccio, A.; Mortensen, M. E.; Kelley, M. T. (1992). "Fatal Ingestion of Boric Acid in an Adult". American Journal of Emergency Medicine 10 (6): 545–547. PMID 1388380. doi:10.1016/0735-6757(92)90180-6.
- Duldner, J. E. (30 January 2009). "Boric Acid Poisoning". A.D.A.M. Medical Encyclopedia. MedLine Plus.
- NSW Food Authority. "Borax and Boric Acid". Australia: New South Wales Government. Retrieved 2009-09-24.
- "Document library - ECHA" (PDF). Echa.europa.eu. Retrieved 2013-05-26.
- Abercrombie, P. (2010). "Vaginitis". In Maizes, V.; Low Dog, T. Integrative Women's Health. New York, NY: Oxford University Press. p. 192. ISBN 978-0-19-537881-8.
- Iavazzo C, Gkegkes ID, Zarkada IM, Falagas ME (August 2011). "Boric acid for recurrent vulvovaginal candidiasis: the clinical evidence". J Womens Health (Larchmt) 20 (8): 1245–55. PMID 21774671. doi:10.1089/jwh.2010.2708.
- Harvey, S. C. (1980). "Antiseptics and Disinfectants; Fungicides; Ectoparasiticides". In Gilman, A. G.; Goodman, L. S.; Gilman, A. Goodman & Gillman's The Pharmacological Basis of Therapeutics (6th ed.). p. 971. ISBN 978-0-02-344720-4.
- Office of Prevention, Pesticides and Toxic Substances (1993). "R.E.D. Facts: Boric Acid" (PDF). United States Environmental Protection Agency. Retrieved 2008-04-21.
- Birch, Robert G (2013). "Boric acid as a swimming pool buffer" (PDF). The University of Queensland. Retrieved 30 Nov 2013.
- Düzcükoğlu, H.; Acaroğlu, M. (2009). "Lubrication Properties of Vegetable Oils Combined with Boric Acid and Determination of Their Effects on Wear". Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 32 (3): 275–285. doi:10.1080/15567030802606053.
- Singh, Harpreet. "Standard equipments". Punjab State Carrom Association. Retrieved 2009-09-24.
- Kistler, R. B.; Helvaci, C. (1994). "Boron and Borates". In Carr, D. D. Industrial Minerals and Rocks (6th ed.). Littleton, CO: SME. pp. 171–186.
- Tsuyumoto, I.; Oshio, T.; Katayama, K. (2007). "Preparation of Highly Concentrated Aqueous Solution of Sodium Borate". Inorganic Chemistry Communications 10 (1): 20–22. doi:10.1016/j.inoche.2006.08.019.
- Tsuyumoto, I.; Oshio, T. (2009). "Development of Fire Resistant Laminated Wood Using Concentrated Sodium Polyborate Aqueous Solution". Journal of Wood Chemistry and Technology 29 (4): 277–285. doi:10.1080/02773810903033721.
- "Method 3052 microwave assisted acid digestion of siliceous and organically based matrices" (PDF). US EPA.
- Dempsey, Jock (2009) . "BORAX". Dempsey's Forge. Retrieved 2010-07-23.
- Prager, Felice. "Science Becomes a Toy - Silly Putty". Loti.com. Rewind the Fifites. Retrieved 2013-06-07.
- "Chemicals Used by Hydraulic Fracturing Companies in Pennsylvania for Surface and Hydraulic Fracturing Activities" (PDF). Pennsylvania Department of Environmental Protection, Bureau of Oil and Gas Management. 30 June 2010.
- Jolly, W. L. (1991). Modern Inorganic Chemistry (2nd ed.). New York: McGraw-Hill. ISBN 0-07-112651-1.
- Goodman, L.; Gilman, A.; Brunton, L.; Lazo, J.; Parker, K. (2006). Goodman & Gilman's The Pharmacological Basis of Therapeutics. New York: McGraw Hill.
- Cordia JA, Bal EA, Mak WA and Wils ERJ (2003), Determination of some physico-chemical properties of Optibor EP. Rijswijk, The Netherlands: TNO Prins Maurits Laboratory, report PML 2002-C42rr, GLP, Unpublished, confidential data provided by Bor ax Europe Limited
- Boric Acid Technical Fact Sheet - National Pesticide Information Center
- Boric Acid General Fact Sheet - National Pesticide Information Center
- International Chemical Safety Card 0991
- US EPA Pesticide Reregistration Eligibility Decision
- National Pollutant Inventory - Boron and compounds
- Boric acid at ChemicalLand21
- European Chemicals Agency (ECHA)"New Public Consultation on Eight Potential Substances of Very High Concern" - includes Boric Acid. Closes 22 April 2010
- ChemSub Online: Boric acid
Lua error in Module:Authority_control at line 346: attempt to index field 'wikibase' (a nil value).