|This article needs additional citations for verification. (February 2007)|
A bubble canopy is a canopy made without bracing, which attempts to provide 360° vision to the pilot.
Bubble canopies have been in use since before World War II, with some experimental bubble canopy designs in the World War I era. The British had already developed the "Malcolm hood", which was a bulged canopy, but the British Miles M.20 was one of the first aircraft designs to feature a true bubble canopy. Although it never went into production the concept of the bubble canopy was utilised on other British aircraft, such as the Hawker Typhoon and Tempest. It was also fitted to the P-51 Mustang and P-47 Thunderbolt amongst others.
The purpose of a bubble canopy is to give a pilot a much wider field-of-view than flush canopies, such as those seen on early models of the F4U, P-51 and P-47, which left a conspicuous blind spot behind the pilot that enemy pilots could take advantage of to sneak up on an aircraft.
The first combat aircraft had narrow fuselages, which often were not tall enough to block visibility to the rear. As planes became larger, heavier and faster, designs had to be made stronger, which often meant a taller rear fuselage, but designers tried to maintain the narrow fuselage for visibility.
However, as speed continued to increase, it became necessary to enclose cockpits -- and this, in turn, streamlined aircraft so that they were faster. Increased "G-loading" during maneuvers forced pilots to wear tight, restrictive shoulder harnesses, and armor plating began to be installed to protect pilots from projectiles coming from behind.
Unfortunately, these changes denied a pilot the ability to twist around and look directly behind (known as "Checking Six," or looking at the "Six O'clock" position directly to the rear). Mirrors offered some help, but had a narrow field of view.
Prior to bubble canopies, some aircraft, such as the P-40 Warhawk, featured a hybrid flush canopy design, combining a narrow rear fuselage with a glass enclosure conforming to the shape of a full-width fuselage. This provided increased visibility while still allowing a pilot to keep the canopy closed for greater performance.
Another hybrid was the Malcolm hood. While not offering as much visibility to the rear as the P-40 enjoyed, it allowed a pilot more visibility than a flush canopy would.
- Miles M.20.jpg
Miles M.20 showing the bubble canopy
F-86 Sabre in flight
- F-22 cockpit close-up.jpg
F-22 showing the frameless canopy and the 360° view for the pilot.
- Krzesiny 86RB.JPG
The twin bubble canopies of the Mil Mi-24 Hind helicopter.