|The examples and perspective in this article may not represent a worldwide view of the subject. (July 2011)|
Clapboard, also known as bevel siding, lap siding or weatherboard (with regional variants as to the exact definitions of these terms) is wooden siding of a building.
Later, the boards were radially-sawn in a special type of sawmill called a clapboard mill producing vertical-grain clapboards. The more commonly used boards in New England are vertical-grain boards. Depending on the diameter of the log, cuts are made from 4 1/2" to 6 1/2" deep the full length of the log. Each time the log turns for the next cut, it is rotated 5/8" until it is rotated a full 360 degrees. This gives the radially-sawn clapboard its taper and true vertical grain.
Flat-grain clapboards are cut tangent to the annual growth rings of the tree. As this technique was common in most parts of the British Isles, it was carried by immigrants to their colonies in the Americas and in Australia and New Zealand. Flat-sawn wood cups more and does not hold paint as well as radially sawn wood.
Chamferboards are an Australian form of weatherboarding using tongue-and-groove joints to link the boards together to give a flatter external appearance than regular angled weatherboards.
Some modern clapboards are made up of shorter pieces of wood finger jointed together with an adhesive.
In North America clapboards were historically made of split oak, pine and spruce. Modern clapboards are available in red cedar and pine.
In some areas, clapboards were traditionally left as raw wood, relying upon good air circulation and the use of 'semi-hardwoods' to keep the boards from rotting. These boards eventually go grey as the tannins are washed out from the wood. More recently clapboard has been tarred or painted—traditionally black or white due to locally occurring minerals or pigments. In modern clapboard these colors remain popular, but with a hugely wider variety due to chemical pigments and stains.
It is good practice to leave the lower part of a wall free of cladding to avoid dampness caused by air not circulating, which could subsequently rot the clapboard. Watermills were traditionally made of brick up to the first floor, and in windmills upper storeys were often timber-framed and only the caps were clapboarded.
Clapboard houses may be found in most parts of the British Isles, and the style may be part of all types of traditional building, from cottages to windmills, shops to workshops, as well as many others.
In New Zealand, clapboard housing dominates buildings before 1960. Clapboard, with a corrugated iron roof, was found to be a cost-effective building style. After the big earthquakes of 1855 and 1931, wooden buildings were perceived as being less vulnerable to damage. Clapboard is always referred to as 'weatherboard' in New Zealand.
- Whitney, William Dwight. "Clapboard" def. 1. The Century dictionary; an encyclopedic lexicon of the English language,. New York: The Century Co., 188991. Print.
- http://www.popularwoodworking.com/article/Finish_Both_Sides_Not_Necessary/ Heart side of boards
- "Chamferboard". Australian Building Inspection Services. Retrieved 9 May 2015.