Open Access Articles- Top Results for Curb cut

Curb cut

File:Pram Ramp.jpg
A pram ramp with tactile paving that connects an off-street walking trail to a road

A curb cut (U.S.), curb ramp, dropped kerb (UK), pram ramp, or kerb ramp (Australia) is a solid (usually concrete) ramp graded down from the top surface of a sidewalk to the surface of an adjoining street. It is designed for pedestrian uses and commonly found in urban areas where pedestrian activity is expected. In comparison with a conventional curb (finished at a right angle Script error: No such module "convert". above the street surface) a curb cut is finished at an intermediate gradient that connects both surfaces, sometimes with tactile paving.


Historically speaking, footpaths were finished at right angles to the street surface with conventional curb treatments. Kalamazoo, Michigan installed curb cuts in the 1940s as a pilot project to aid employment of disabled veterans.[1] A major project in Berkeley, California lead by Ed Roberts and others at the Center for Independent Living led to curb cuts up and down Telegraph and Shattuck Avenues creating an extensive path of travel.[2] Following this, the value of curb cuts was promoted more strongly and their installment was often made on a voluntary basis by municipal authorities and developers.

More recently, curb cuts in Western countries have been mandated by legislation such as the Americans with Disabilities Act of 1990 (ADA) in the United States, which requires that curb cuts be present on all sidewalks. This was followed by the Disability Discrimination Act 1992 in Australia. The legislative requirements have been increased from the original requirements in recent times, to the point where existing treatments can now fail to meet the most recent design requirements.[3]

Supporters of the requirements point to curb cuts as an example of legislation that benefits every user of public spaces, even though the law was aimed at people with disabilities.

Users and uses

File:Curb cut.jpg
A curb cut at an intersection

Curb cuts placed at street intersections allow someone in a wheelchair, on a toddler's tricycle etc., to move onto or off a sidewalk less difficulty.

It also benefits a pedestrian when he/she is using a walker or cane, pushing a stroller, a pram or a buggy for babies, pushing or pulling a cart or hand truck, or walking next to a bicycle, and someone on a bicycle, roller skates, skateboard.

Other curb cuts

A wider curb cut is also useful for motor vehicles to enter a driveway or parking lot on the other side of a sidewalk.

Smaller curb cuts may be utilized along streets, parking areas or sidewalks to redirect water from traditional drainage ways to a stormwater BMPs which allows infiltration, such as a grassed area or rain garden.


Accessible curb cuts transition from the low side of a curb to the high side (usually 15 cm change in level). Accessible curb ramps are a minimum of 1 metre wide. They are sloped no greater than 1:12 (8.33%), which means that for every 12 metres of horizontal distance, they rise no more than one metre. The concrete curb ramp is sometimes scored with grooves, the texture of which may serve as a warning to vision-impaired persons of the transition to the street. Such grooves also allow for traction and water runoff, may be stained a color that significantly contrasts with the adjacent concrete. If a curb ramp contains flared sides, they are usually no greater than 1:10 slope.

Pram ramps in Australia are designed according to Australian Standard AS 1428: Design for access and mobility.


  1. ^ Brown, Stephen. "The curb ramps of Kalamazoo". Independent Living Institute. Retrieved July 18, 2011. 
  2. ^ Williamson, Bess. "The People's Sidewalks". Boom: A Journal of California. Retrieved 22 September 2014. 
  3. ^ City of Tea Tree Gully, 2009. Paths: Infrastructure and Asset Management Plan, p. 17