TOPIX 100 Component
Nikkei 225 Component
|Founder||Seiuemon Inaba, Dr. Eng.|
Dr. Eng. Seiuemon Inaba|
Dr. Eng. Yoshiharu Inaba
(President & CEO)
|Revenue||JPY) (FY 2012)|
|JPY) (FY 2012)|
|#redirect Template:If affirmed||JPY) (FY 2012)|
Number of employees
|5,261 (consolidated) (as of December 2013)|
Footnotes / references|
FANUC (//; often styled Fanuc) is a group of companies, principally FANUC Corporation (ファナック株式会社 Fanakku Kabushikigaisha?) of Japan, Fanuc America Corporation of Rochester Hills, Michigan, USA, and FANUC Europe Corporation S.A. of Luxembourg, that provide automation products and services such as robotics and computer numerical control systems. FANUC is one of the largest makers of industrial robots in the world. FANUC had its beginnings as part of Fujitsu developing early numerical control (NC) and servo systems. The company name is an acronym for Factory automation numerical control.
In 1972, the Computing Control Division became independent and FANUC Ltd was established.
The company's clients include US and Japanese automobile and electronics manufacturers.[which?] Use of industrial robots has allowed companies like Panasonic in Amagasaki to run factories which produce 2 million television sets a month (mostly high end plasma LCD screens including a 103 inch model) with just 25 people.
FANUC has joint ventures, subsidiaries, and sales offices on 5 continents and over 22 countries. It is the largest maker of CNC controls by market share with 65% of the global market. and is the leading global manufacturer of factory automation systems.
Subsidiaries and joint ventures
FANUC America Corporation is responsible for FANUC operations in North and South America. The current incarnation, organized in 2013, unifies FANUC activities in the Americas, including the former FANUC Robotics America Corporation (1992-2013) and FANUC CNC America (2010-2013), which succeeded an earlier incarnation of FANUC America Corporation.
FANUC Robotics America Corporation (1992-2013) supplied robotic automation in North and South America, with over 240,000 robots installed. It also produced software, controls, and vision products that aid in the development of robotic systems. Headquartered in Rochester Hills, Michigan, the company had 10 regional locations in the U.S., Canada, Mexico and Brazil. The company provided these systems for applications including automotive and fabricated metals to medical devices and plastics. It was founded in 1982 as a joint venture between FANUC Ltd and General Motors Corporation, named GMFanuc Robotics Corporation. A staff of 70 began work at the GM Technical Center in Warren, Michigan. In 1992, the company became a wholly owned subsidiary of FANUC Ltd of Oshino-mura, Japan. The company was a member of the Robotics Industries Association (RIA) and of the International Federation of Robotics (IFR).
In 2010, FANUC America Corporation and the prior CNC business unit from GE Fanuc Intelligent Platforms in the US were combined into a new company by the name of FANUC CNC America. This business unit was a wholly owned subsidiary of FANUC Ltd. of Japan and offered CNC systems, lasers, Manufacturing Intelligence software products, field repairs and advanced technical services, expanded training classes, a vast inventory of CNC replacement parts, PCB motor repair and return, field support, and CS-24 after hours support. It was headquartered in the Chicago suburb of Hoffman Estates, Illinois. It offered CNC and laser technical services, training, replacement parts, PCB and motor repair and return, field support, and after hours support. It had over 30 locations in the U.S., Canada, Mexico, Brazil and Argentina. The company provides these services to machine tool builders, machine tool dealers, and small mom and pop tool shops across a variety of industries. In 1977, the company was established as a wholly owned subsidiary of FANUC Ltd of Oshino-mura, Japan.
GE Fanuc Intelligent Platforms (1986-2010) was a joint venture between General Electric and FANUC Ltd. In 2009, GE and FANUC Ltd. agreed to split, with FANUC Ltd. retaining the CNC business. GE renamed its part of the business GE Intelligent Platforms.
Fanuc India operations are led by Sonali Kulkarni.
FANUC NC controllers
Control / device naming conventions
Each generation of FANUC numerical control system has different levels of device control capabilities, and these are generally referred to by a model or series number.
Each controller model is typically available with several device control capabilities, depending on what software functions are licensed for use on that device. Some common control capabilities are:
- M - Milling
- T - Turning (lathe)
- TT - Twin Turret
- P - Punch press
- G - Grinding
Within each model name, there can also be generational updates for each model, usually indicated by a trailing letter.
Model 0 is somewhat unusual in that both the number zero and the letter O are used interchangeably to indicate the model.
There is no specific syntax for distinguishing the model from the device type and series, with spaces or dashes or slashes, which can result in difficulty searching for information, parts, and service for this equipment. For example, in the FANUC-0 series, these are all valid identifications for various types of NC controls and machines:
|Various model names||Type||Series||Notes|
|FANUC-0MA, FANUC 0-MA, FANUC 0M-A, FANUC 0M/A, FANUC 0-M-A, FANUC 0-M/A, FANUC 0 M-A, FANUC 0 M/A, FANUC-0M Model A, FANUC 0-M Model A, FANUC 0/M Model A||Milling||A||number 0|
|FANUC-OPA, FANUC O-PA, FANUC OP-A, FANUC OP/A, FANUC O-P-A, FANUC O-P/A, FANUC O P-A, FANUC O P/A, FANUC-OP Model A, FANUC O-P Model A, FANUC O/P Model A||Punching||A||letter O|
|FANUC-0TB, FANUC 0-TB, FANUC 0T-B, FANUC 0T/B, FANUC 0-T-B, FANUC 0-T/B, FANUC 0 T-B, FANUC 0 T/B, FANUC-0T Model B, FANUC 0-T Model B, FANUC 0/T Model B||Turning||B||number 0|
|FANUC-0TTB, FANUC 0-TTB, FANUC 0TT-B, FANUC 0TT/B, FANUC 0-TT-B, FANUC 0-TT/B, FANUC 0 TT-B, FANUC 0 TT/B, FANUC-0TT Model B, FANUC 0-TT Model B, FANUC 0/TT Model B||Twin Turret||B||number 0|
|FANUC-0GC, FANUC 0-GC, FANUC 0G-C, FANUC 0G/C, FANUC 0-G-C, FANUC 0-G/C, FANUC 0 G-C, FANUC 0 G/C, FANUC-0G Model C, FANUC 0-G Model C, FANUC 0/G Model C||Grinding||C||number 0|
NC controller capabilities
When separate computer aided manufacturing software is used to control these different systems, the model differences can be used to tell the manufacturing software how to more efficiently use the system programming capabilities. Some FANUC NC Controllers include:
|Control name||Series or version||Differences and capabilities|
|FANUC 20||Series A|
|FANUC 20||Series B|
|FANUC 30||Series A|
|FANUC 30||Series B|
|FANUC 2000||Series A|
|FANUC 3000||Series A|
|There is no model 4/4000, likely because it is a Japanese unlucky number|
|FANUC 5||Series A|
|FANUC 7||Series A|
|FANUC 6||Series A|
|FANUC 5||Series B|
|FANUC 6||Series B|
|FANUC 0||Series A, 1985-1986|
|FANUC 0||Series B, 1987-1989|
|FANUC 0||Series C, 1990-1998|
|FANUC 30i||First production: 2003|
|FANUC 31i||First production: 2004|
|FANUC 32i||First production: 2004|
Lua error in package.lua at line 80: module 'Module:Portal/images/r' not found.
- "Company Outline". FANUC Corporation. Retrieved March 31, 2013.
- "FANUC Corporate Profile". Google Finance. Retrieved March 19, 2014.
- "Annual Report 2013" (PDF). FANUC Corporation. February 6, 2014. Retrieved March 31, 2013.
- "FANUC Group - website". fanuc.eu. Retrieved 2014-10-08.
- "FANUC's Management - Profile". FANUC Corporation. Retrieved 2008-06-06.
- "TOPIX Core30 Components" (PDF). Japan Exchange Group. Retrieved March 19, 2014.
- "Components:Nikkei Stock Average". Nikkei Inc. Retrieved March 19, 2014.
- TrustedReviews.com Panasonic Press Tour Japan 2007 p2-3
- "FANUC company profile". ENGINEERING.com, Inc. Retrieved September 17, 2014.
- "FANUC History". FANUC Europe Corporation. Retrieved March 19, 2014.
- American Machinist, GE, Fanuc Agree to Split
- "How Capital Investment Tax Credits Could Help Rebuild America’s Manufacturing Sector". Commonweal Institute. Retrieved 2010-10-21.
- "GE Fanuc Joint Venture Dissolved". NBC29. Retrieved 2010-10-21.
- Memex Automation - Fanuc 0 M/T Model C Serial (RS232) Connection Guide http://www.memex.ca/docs/Fanuc_Model_C_serial_RS232_Connection_Guide.pdf
- GE Fanuc (2004). "CNC Series 30i/31i/32i" (PDF). Eagle Eye CNC Routers. Retrieved 2014-01-29.
- Fanuc Control History NC to Fanuc CNC Systems
|40x40px||Wikimedia Commons has media related to FANUC.|
- FANUC Corporation Invalid language code.
- FANUC America Corporation
- FANUC Robotics Corporation
- FANUC Europe Corporation
- FANUC UK Ltd
- Hoover's Profile: FANUC CORPORATION
- FANUC's thumbnail overview of the history of FANUC CNC