|File:Ferrari F430 front 20080605.jpg|
|Designer||Frank Stephenson at Pininfarina|
|Body and chassis|
|Layout||Rear mid-engine, rear-wheel drive|
|Engine||4.3 L Ferrari F136 E V8|
6-speed 'F1' electrohydraulic manual
|Wheelbase||Script error: No such module "convert".|
|Length||Script error: No such module "convert".|
|Width||Script error: No such module "convert".|
Coupe: Script error: No such module "convert".|
Spider: Script error: No such module "convert".
|Curb weight||Script error: No such module "convert".|
The Ferrari F430 is a sports car that was produced by the Italian car manufacturer Ferrari from 2004 to 2009. A successor to the Ferrari 360, it debuted at the 2004 Paris Motor Show. Its replacement, the Ferrari 458, was unveiled on 28 July 2009.
- 1 Overview
- 2 Variants
- 3 Racing
- 4 Recall
- 5 References
- 6 External links
The MSRP for a Ferrari F430 was $186,925 to $217,318 in the United States, £119,500 in the United Kingdom, approximately €175,000 in the European Union, and $379,000 for the base model to $450,000 for the Spider F1 in Australia and New Zealand.
Designed by Pininfarina, under the guidance of Frank Stephenson, the body styling of the F430 was revised from its predecessor, the Ferrari 360, to improve its aerodynamic efficiency. Although the drag coefficient remained the same, downforce was greatly enhanced. Despite sharing the same basic Alcoa Aluminium chassis, roof line, doors and glass, the car looked significantly different from the 360. A great deal of Ferrari heritage was included in the exterior design. At the rear, the Enzo's tail lights and interior vents were added. The car's name was etched into the Testarossa-styled driver's side mirror. The large oval openings in the front bumper are reminiscent of Ferrari racing models from the 60s, specifically the 156 "sharknose" Formula One car and 250 TR61 Le Mans cars of Phil Hill. Designed with soft-top-convertible.
The F430 features a 4.3L V8 petrol engine of the "Ferrari-Maserati" F136 family. This new power plant was a significant departure for Ferrari, as all previous Ferrari V8's were descendants of the Dino racing program of the 1950s. This fifty-year development cycle came to an end with the entirely new 4.3L, the architecture of which is expected to replace the Dino-derived V12 in most other Ferrari cars. The engine's output specifications are: Script error: No such module "convert". at 8500 rpm and Script error: No such module "convert". of torque at 5250 rpm, 80% of which is available below 3500rpm. Despite a 20% increase in displacement, engine weight grew by only 4 kg and engine dimensions were decreased, for easier packaging. The connecting rods, pistons and crankshaft were all entirely new, while the four-valve cylinder head, valves and intake trumpets were copied directly from Formula 1 engines, for ideal volumetric efficiency. The F430 has a top speed in excess of Script error: No such module "convert". and can accelerate from 0 to Script error: No such module "convert". in 3.7 seconds, 0.7 seconds quicker than the old model. While Scuderia version of the F430 is faster, at only 3.5 seconds.
The brakes on the F430 were designed in close cooperation with Brembo (who did the calipers and discs) and Bosch (who did the electronics package), resulting in a new cast-iron alloy for the discs. The new alloy includes molybdenum which has better heat dissipation performance. The F430 was also available with the optional Carbon fibre-reinforced Silicon Carbide (C/SiC) ceramic composite brake package. Ferrari claims the carbon ceramic brakes will not fade even after 300-360 laps at their test track.
Other notable features include the first application of Ferrari's manettino steering wheel-mounted control knob. Drivers can select from five different settings which modify the vehicle's ESC system, "Skyhook" electronic suspension, transmission behavior, throttle response, and E-Diff. The feature is similar to Land Rover's "Terrain Response" system.
In the US, the company requested an exemption from the airbag design requirements, which was eventually granted, allowing the car to continue to be sold in the US.
The F430 Spider is the convertible version based on the coupé. The F430 Spider is Ferrari's 21st road going convertible. The Ferrari F430 Spider made its world premiere at the Geneva motor show. The car was designed by Pininfarina with aerodynamic simulation programs also used for Formula 1 cars. The roof panel automatically folds away inside a space above the engine bay. The conversion from a closed top to an open-air convertible is a two-stage folding-action. The interior of the Spider is identical to that of the coupé.
The F430 Challenge is the track version of the F430, designed for the Ferrari Challenge. The engine remained untouched but the vehicle's weight was reduced, resulting in a top speed of 202 mph (325 km/h). The production model was unveiled at the Los Angeles Auto Show in January, 2005.
Serving as the successor to the Challenge Stradale, the 430 Scuderia (scuderia meaning "stable of horses", but also used in the context of motor racing teams, including Ferrari's own) was unveiled by Michael Schumacher at the 2007 Frankfurt Auto Show. Aimed to compete with cars like the Porsche RS-models and the Lamborghini Gallardo Superleggera (superleggera meaning super light weight), it is lighter (by 100 kg/220 lb) and more powerful (Script error: No such module "convert". at 8500 rpm) than the standard F430. Increased power comes from a revised intake, exhaust, and an ion-sensing knock-detection system that allows for a higher compression ratio. Thus the weight-to-power ratio is reduced from 2.96 kg/hp to 2.5 kg/hp. In addition to the weight saving measures, the Scuderia semi-automatic transmission gained improved "Superfast", known as "Superfast2", software for faster 60 millisecond shift-times. A new traction control system combined the F1-Trac traction and stability control with the E-Diff electronic differential. The Ferrari 430 Scuderia accelerates from 0-Script error: No such module "convert". in 3.6 seconds, with a top speed of Script error: No such module "convert".. Ferrari claims that around their test track, Fiorano Circuit, it matches the Ferrari Enzo, and the Ferrari F430's successor, the Ferrari 458.
Scuderia Spider 16M
|Problems playing this file? See media help.|
To commemorate Ferrari's 16th victory in the Formula 1 Constructor's World Championship in 2008, Ferrari unveiled the Scuderia Spider 16M at World Finals in Mugello. It is a convertible version of the 430 Scuderia.
The engine produces Script error: No such module "convert". at 8500 rpm and Script error: No such module "convert". torque at 5250 rpm. The car has a dry weight of Script error: No such module "convert". (80 kg lighter than the F430 Spider) and a curb weight of Script error: No such module "convert".. The chassis was stiffened to cope with the extra performance available and the car featured many carbon fibre parts as standard. Specially lightened front and rear bumpers (compared to the 430 Scuderia) were a further sign of the efforts Ferrari was putting into this convertible track car for the road. Unique 5-spoke forged wheels were produced for the 16M's launch and helped to considerably reduce unsprung weight with larger front brakes and callipers added for extra stopping power (also featured on 430 Scuderia). It accelerates from 0-Script error: No such module "convert". in 3.7 seconds, with a top speed of Script error: No such module "convert"..
499 vehicles were released beginning early 2009 and all were pre-sold to select clients.
F430 Spider Bio Fuel
A version of the F430 Spider that runs on ethanol, called the F430 Spider Bio Fuel, was on display at the 2008 Detroit Auto Show. It contained the same 4.3 litre V8 engine, producing Script error: No such module "convert"., with a 4% increase in torque, with 5% less carbon dioxide emissions than the standard F430 Spider.
The F430-based Ferrari SP1 (Special Project Number 1), was the first one-off special produced by the Ferrari Portfolio Program. The body was designed by former Pininfarina designer Leonardo Fioravanti, at the behest of Junichiro Hiramatsu, a Japanese businessman who was the former president of the Ferrari Club of Japan and an avid collector; he had admired Fioravanti's 1998 F100 prototype.
Built since 2006 by Ferrari Corse Clienti department in collaboration with Michelotto Automobili, the F430 GTC is a racing car designed to compete in international GT2 class competition, such as in the American Le Mans Series, Le Mans Series, and FIA GT Championship. F430 GTCs also compete at the 24 Hours of Le Mans. The GTC was the fastest and most developed racing version of the F430.
In FIA GT2 championship, in order to render the car performances more uniform, the cars are forced to run with a specific minimum weight and with an engine restrictor that depends on the engine displacement. Hence the 4.3 L V8 engine in GT2 races is destroked to 4.0 L in order to compete in the 3.8–4.0 L class, which is allowed to race with a minimum weight of Script error: No such module "convert".. Using the 4.0 L engine, the minimum weight of the F430 would increase by Script error: No such module "convert".. In this race configuration, the engine produces somewhat less power, but this is compensated by the lower car weight, which yields a better Power-to-weight ratio.
The F430 GTCs won their class championships in the ALMS and FIA GT, as well as scoring class wins at the 2007, 2009 and 2010 12 Hours of Sebring, at the 2008 and 2009 24 Hours of Le Mans and at the 2008 and 2009 Petit Le Mans.
- Category: American Le Mans GT2
- Chassis construction and materials: Aluminum composite monocoque, steel safety cage (per IMSA/ACO/FIA rules), engine and gearbox stiffly fitted to the chassis
- Bodywork: Carbon fibre, kevlar, nomex and aluminium
- Engine manufacturer: Custom-built Scuderia Ferrari
- Engine designation: F136
- Engine configuration: V8 engine
- Engine V-angle: 90° cylinder angle
- Engine type: Atmospheric water-cooled engine
- Engine displacement: Script error: No such module "convert".
- Engine position: Mid-engined, longitudinally-mounted
- Aspiration: Normally-aspirated
- Cylinder block: Aluminium alloy
- Cylinder head: Aluminium alloy
- Valvetrain: DOHC, 32-valve, four valves per cylinder
- Intake air restrictors: 2 x 28.6 mm according to IMSA/ACO/FIA regulations
- Bore: Script error: No such module "convert".
- Stroke: Script error: No such module "convert".
- Cylinder bore spacing: Script error: No such module "convert".
- RPM rev limit: 9000 rpm
- Power output: Script error: No such module "convert". @ 7000 rpm
- Torque: Script error: No such module "convert". @ 5500 rpm
- Pistons: Mahle aluminium alloy
- Engine management: Magneti Marelli
- Fuel: Ethanol E10 (10% Ethanol, 90% gasoline)
- Fuel delivery: Magneti Marelli MRV8 fuel injection
- Gearbox: Hewland manual sequential 6 speed + reverse sequential gearbox control gear change time 500 milliseconds operated via gear shift lever
- Clutch: Brembo Script error: No such module "convert". synthesized 3-discs carbon composite dry clutch operated via foot-pedal clutch
- Differential: Self-locking, adjustable by blades
- Drivetrain: Rear-wheel drive
- Drive shafts: Constant-velocity tripod slip-joint shafts
- Exhaust systems: Tubi 4-way inconel fabricated exhaust manifold headers. Rearside exit
- Filter: FIAMM
- Spark plugs: Magneti Marelli
- Ignition: Magneti Marelli CDI
- Car wiring harness: Magneti Marelli
- Data logging systems: Magneti Marelli
- Battery: Magneti Marelli 12 Volts
- Lubrication: Quaker State dry sump
- Length: Script error: No such module "convert".
- Width: Script error: No such module "convert". excluding side rear view mirrors, Script error: No such module "convert". including side rear view mirrors
- Height: Script error: No such module "convert". minimum, Script error: No such module "convert". maximum depending on the use of ride height
- Wheelbase: Between 2600-2608 mm (102.4-102.7 in)
- Front axle track width: Script error: No such module "convert".
- Rear axle track width: Script error: No such module "convert".
- Minimum weight: Script error: No such module "convert". excluding driver and fuel, Script error: No such module "convert". including driver and fuel. All the liquids standard level
- Fuel tank capacity: Script error: No such module "convert".
- Steering: Rack and pinion system, power steering
- Bearings: SKF
- Aerodynamics: Front fenders, rear apron, hood, roof, trunk lid, rear wing, and rear wheel arches in carbon-fibre. Adjustable single-element rear wing, carbon floor with rear diffuser
- Brakes: Brembo ventilated carbon-fibre reinforced silicon carbide ceramic steel composite discs, 6 pistons (front) and 4 pistons (rear) calipers, adjustable brake balance. AP Racing/Brembo callipers, Brembo pads
- Front brake size: 380 × 32 mm
- Rear brake size: 332 × 32 mm
- Dampers: Öhlins
- Springs: Eibach Springs
- Suspensions (front and rear): Independent wheels, overlapped aluminium triangular wishbones, adjustable shock absorbers, adjustable anti-roll bar
- Wheel rims: BBS forged aluminium wheels
- Front wheel size: 10 x 18 in
- Rear wheel size: 11 x 18 in
- Tyres: Michelin Pilot, Hankook Ventus radial slick dry and treaded rain tyres
- Front tyre size: 30/65 - R18
- Rear tyre size: 31/71 - R18
- Safety equipment: Sabelt 6-point seat belt, rear view mirror, HANS device, helmet, headsock, race suit, NOMEX firesuit, racing gloves, racing socks, racing boots, headlights, windshield wipers, roll cage, racing seats
- Headlights: Hella 15 volts
- Racing seats: OMP
- Roll cage: Ferrari-built OMP high-strength steel roll cage
- Cockpit features: Hurst short throw shifter, fire suppression activation switch, electrical system cut-off
- Cockpit drinking system: H2O mineral water which connect the pipe from water bag cockpit to the driver's helmet
- Display instrumentation: Magneti Marelli DDU 210 LCD display
- Steering wheel: Scuderia Ferrari OMP/MOMO racing steering wheel
- Traction control: Allowed, adjustable TC level
- Machine assembly plant: Ferrari F430 GT build Ferrari Corse Clienti facility Maranello, Italy
- Teams: Risi Competizione, Petersen Motorsports/White Lightning Racing, Corsa Motorsports, JMB Racing, Tafel Racing (since 2008)
Originally based on the F430 Challenge, the F430 GT3 is a specialized racing car developed in 2006 by JMB Racing for the FIA GT3 European Championship and other national GT championships such as British GT and FFSA GT. It is mechanically similar to the F430 Challenge, but has better developed aerodynamics and more power.
The car uses the same 4.3 L V8 engine, tuned to produce Script error: No such module "convert"., making the GT3 more powerful than its GT2 counterpart. However, due to the GT3 regulations stating that the car must have a power-to-weight ratio of around 2.6 kg/hp, the car weighs Script error: No such module "convert". in race trim (driver and fuel excluded), which is roughly Script error: No such module "convert". more than the GT2 spec car. Despite the higher power, it is significantly slower than the GT2 version; for example, in the 2007 Spa 24 Hours endurance race, in which both models were entered, the GT3 spec vehicles' best qualification time was around 8 seconds slower per lap than that set by the GT2 spec vehicle.
Since 2007 a technical partnership between Kessel Racing and JMB brought the production of an Evolution Kit.
The F430 GT3 won the drivers title in the 2007 FIA GT3 European Championship season.
430 GT3 Scuderia
In February 2009, Ferrari recalled about 2,000 2005–2007 F430 Spiders in the U.S., due to the risk that heat from the engine could cause the soft top hydraulic hoses to fracture and leak flammable fluid onto the V8 motor, resulting in a fire.
- "Who's Where: Frank Stephenson appointed Director of Design for Alfa Romeo". cardesignnews.com. Retrieved 2007-12-13.
- "2005 Ferrari F430 Press Release Kit". Ferrari Press Release. Retrieved 2007-04-17.
- "2010 Ferrari 458 Italia Press Release Kit". carsuk. Retrieved 2009-07-28.
- "2006 Ferrari F430 Styles". Edmunds.com.
- "Ferrari 430". Channel4 UK.
- "F430". Ferrari GT - en-EN. Retrieved 12 December 2014.
- http://www.zeroto60times.com/vehicle-make/ferrari-0-60-mph-times/ Accessed May 19, 2015.
- "Car brakes". Brembo. Retrieved 2009-07-15.
- "First Drive: 2005 Ferrari F430". Edmunds.com. 2004-10-14. Retrieved 2009-07-15.
- Goodyear Tire – News Release – Sept 27,2004[dead link]
- "Ferrari 430 Gets Airbag Exemption". Leftlane News. 2006-05-22. Retrieved 2011-03-24.
- "Designs on Geneva" (PDF). Retrieved 2012-01-28.
- "First Drive: 2008 Ferrari 430 Scuderia". Edmunds.com. 2007-09-30. Retrieved 2009-07-15.
- "Grafici 430 Scuderia". Ferrari S.p.A. Retrieved 2010-04-07.
- "Technical specifications". ferrari.com/English. Retrieved 2010-09-29.
- "NEW MODEL: FERRARI SCUDERIA SPIDER 16M". italiaspeed.com/2008/cars. Retrieved 2008-12-19.
- Abuelsamid, Sam (2008-11-09). "Officially Official: Ferrari Scuderia Spider 16M to celebrate F1 title". Autoblog.com. Retrieved 2010-09-30.
- "Ferrari F430 Spider Bio Fuel – 2008 Detroit Auto Show". Motortrend. 2008. Retrieved 2010-08-20.
- "Ferrari SP1". Carbodydesign.com. 2008-11-12. Retrieved 2010-07-07.
- "FIA GT 2007–2008 Sporting Regulations, Article 257, Appendix 1, Restrictors for Normally Aspirated Engines, 2007" (PDF). Retrieved 2010-09-30.
- "55th Annual Mobil 1 Twelve Hours of Sebring" (PDF). imsaracing.net. Retrieved 2009-11-25.
- "Ferrari F430 GT3 Specifications". gt3europe.com. Retrieved 2010-10-20.
- Nate Martinez (Feb 17, 2009). "Nearly 2000 Ferrari F430 Spiders Recalled for Potential Fire Issues". Motor Trend-WOT blog.
|40x40px||Wikimedia Commons has media related to Ferrari F430.|
|« previous — Ferrari road car timeline, 1996–present|
|8 cylinder||Mid-engine berlinetta||360||458|
|Challenge Stradale||F430 Scuderia||458 Speciale|
|12 cylinder||Grand tourer||550 Maranello||575M Maranello||599 GTB Fiorano||F12berlinetta|
|599 GTO|| F60
|2+2 coupé||456||456 M||612 Scaglietti||FF|
|Limited production supercar||F50||Enzo||LaFerrari|
|XX Programmes||FXX||FXX Evoluzione||599XX||599XX Evo||FXX-K|