Open Access Articles- Top Results for Harley-Davidson FL

Harley-Davidson FL

File:Harley-Davidson 2.jpg
Customized Shovelhead Electra Glide with Twin-Cam Electra Glide in background

FL is a model designation used on motorcycles manufactured by Harley-Davidson from 1941 to present. Mostly applied to Harley's large-framed bikes, including the current Touring series, the FL designation is also used with their Softail series, especially on Softails with traditional styling, 16-inch front wheels, and either Springer forks or large-diameter telescopic front forks.

Early FL models

The FL was introduced to the Harley-Davidson model line in 1941. It used a Script error: No such module "convert". version of the "Knucklehead" OHV engine that powered the EL in Script error: No such module "convert". form. The FL shared its frame with the EL and with the U and UL, which used a 74 cubic inch flathead engine. The FL replaced the UH and ULH, which used the same frame with Script error: No such module "convert". flathead engines.[1]

The FL continued relatively unchanged until 1948, when it and the EL were given redesigned "Panhead" engines of the same capacities as before. These engines had several improvements over the earlier "Knuckleheads", including self-adjusting hydraulic lifters and aluminum cylinder heads to reduce weight and improve cooling.[2] The U and UL flathead twins were discontinued in 1948, leaving the OHV EL and FL models as Harley-Davidson's large-frame motorcycles.[3]


In 1949, a year after receiving the "Panhead" engine, the FL was given a new front suspension featuring hydraulically damped telescopic forks, replacing the leading link spring suspension of the time.[4][5] These forks were standard on all big twin models for 1949, including the E, EL, F, and FL.[5] Harley-Davidson offered the spring suspension units on these models[4][5] and recommended their use on sidecar combinations, because the hydraulic forks did not have enough trail to allow the combination to be stable enough for safe operation.[5]

During their debut model year of 1949, Harley referred to their new suspension systems as the "hydraulic front ends". Harley's marketing department promoted the new suspension systems by renaming the big twin models "Hydra Glide" for the 1950 model year. This was Harley-Davidson's first departure from its policy of using alphabetic lettering to identify its models.[4] This name would change twice in the history of the basic large-framed E and F series models, each time signalling an improvement in the bike's technology.[2] In addition, the Glide ending would be used on other models, based on both and FL and FX formats.

In 1952, the Hydra-Glide's transmission standard hand-shift/foot-clutch was supplemented by the optional foot-shift/hand-clutch. The original format continued to be offered as an option until 1978.[2] 1952 was also the last year of the Script error: No such module "convert". EL, making the FL the last remaining large-frame model.[6]

Although the 1903 founding is now the basis for "Anniversary Models", Harley-Davidson's 50th Golden Anniversary was celebrated in 1954 with special paints and badges on the front fender. (1904 was the first year of production.)

A more highly tuned engine with high-compression heads, higher-lift cams, and polished ports, was offered with the FLH version of 1955.[7] The FLH designation has continued up to the present.


The FL model was given a new frame in 1958. This frame included a rear swingarm suspended by a pair of coil-over-shock suspension units. In honor of this fully suspended chassis, the FL's model name was changed from Hydra-Glide to Duo-Glide.[8]

Unlike OHV configuration, aluminum heads, and telescopic-fork front suspension, however, this improvement in technology was applied to the small-frame bikes first, the K-series having received rear suspension in 1952.[9]

Electra Glide

Electra Glide Ultra Classic. This is based on the Tour Glide frame, but uses the Electra Glide fork-mounted "batwing" fairing

The third and final change given to the name of the basic FL model would occur in 1965, the final year of the "Panhead" engines. These last "Panheads" were the first "big-twin" Harley-Davidson engines to be equipped with electric starters, the Servi-Car having received electric start the year before. This innovation for Harley-Davidson was greeted with the new model name of Electra Glide.[2]

In 1966, the "Panhead" gave way to the "Shovelhead", gaining a ten percent increase in power in the process.[10]

A fork-mounted fairing became available on Electra Glides in 1969. This became unofficially known as the "batwing" fairing.[11] Although the batwing fairing was an easily removable option on early Electra Glides, it was not removable on later machines, as the instruments were moved from the fuel tank into the fairing.

The FL frame was the basis for the 1971 FX Super Glide. The FX mated the FL frame with the forks of the XL Sportster, with buckhorn handlebars and a large fibreglass tailpiece completing the Super Glide specification.[12]

The FL was given a front disc brake in 1972.[13]

The three-speed plus reverse option was discontinued in 1977.[14]

A 1977 Harley-Davidson Confederate Edition of the FLH Electra Glide that featured commemorative paint and tank and fender decals was produced. The unit production was in such low volume numbers - only 44 - as to make it one of the rarest of the company's motorcycles.[15]

An Script error: No such module "convert". engine was made optional on the Electra Glide in 1978. However, the FL designation was not changed as a result.[14] By 1981, the 80 cubic inch engine was the standard engine; the Script error: No such module "convert". engine being discontinued.[16]

The low-compression FL engine was discontinued in 1979, as was the option for hand-shift/foot-clutch transmission controls.[2][14]

Tour Glide

The FLT Tour Glide was introduced in 1979 as a 1980 model.[17] Sold alongside the existing FLH Electra Glide, the FLT had a larger frame with rubber engine mounts, a five-speed transmission, the Script error: No such module "convert". engine, and a frame-mounted fairing. In order that the FLT frame, which was larger and heavier than the large and heavy FLH frame, would handle acceptably, the front forks were given radical steering geometry which had them mounted behind the steering head, with the frame behind the steering head being recessed to allow adequate steering lock.[16]

The FLHT was introduced in 1983. This was an Electra Glide based on the FLT Tour Glide frame, but using the Electra Glide "batwing" fairing instead of the Tour Glide frame-mounted fairing.[16]

Except for the base FLH, all 1984 FLs were equipped with the new rubber-mounted Evolution engine and a five-speed transmission.[18]

All "Shovelhead" engines were discontinued by the 1985 model year.[19] In that year, the four-speed solid-engine-mount FLH was modified to accept rubber mounting and the Evolution engine. The FLH was discontinued in 1986; all Touring models thereafter used the FLT/FLHT frame.[16] Ironically, the FLT Tour Glide, which introduced the current Touring frame, was dropped from the lineup in 1996. A smaller version of the frame-mounted Tour fairing would return with the FLTR Road Glide in 1998.[20]

The Evolution engine was replaced by the Twin Cam 88 engine on all large-framed Harley-Davidson motorcycles in 1999.[16] The Twin Cam engine was enlarged from 88 to 96 in 2007.[21]

Unfaired Glides

An unfaired version of the FLH Electra Glide, known as the FLHS Electra Glide Sport, was available from 1979 to 1982. An unfaired FLHT Electra Glide reintroduced the FLHS Electra Glide Sport name in 1987. In 1994, the FLHS Electra Glide Sport was replaced by the FLHR Road King, which continues to the present day.[16]

2009 Touring chassis

For the 2009 model year, Harley-Davidson redesigned the entire touring range. The changes included a new frame, new swingarm, a completely revised engine-mounting system, 17-inch front wheels for all models except the Road King Classic, a Script error: No such module "convert". fuel tank, and a 2-1-2 exhaust. The changes result in greater load carrying capacity, better handling, a smoother engine, longer range and less exhaust heat transmitted to the rider and passenger.[22][23]

Tri-Glide Ultra Classic

Also released in the FL Touring range for the 2009 model year was the FLHTCUTG Tri Glide Ultra Classic, the first three-wheeled Harley-Davidson since the Servi-Car was discontinued in 1973. This model features a unique frame and a 103 cid engine exclusive to the trike.[24]

FL Softails

File:Evb-my hog.jpg
2002 FLSTC Heritage Softail Classic.
See also: Softail

Harley-Davidson introduced the Softail chassis in 1984.[25] The original Softails used the small FX telescopic forks, but the FLST Heritage Softail with large FL telescopic forks was introduced in 1986. The FLSTC Heritage Softail Classic, with large front forks and retro styling, was in production by 1988.[26]

Other Softails with big forks followed, including the 1990 introduction of the FLSTF Fat Boy and the 1993-only FLSTN "Cow Glide".[27][28] The base FLST Heritage Special was discontinued in 1991.[16] The FLSTN was continued after 1993 without the bovine motif as the Nostalgia model until 1997, when it was replaced by the FLSTSC Springer Classic.[16] The Springer Classic is also designated as an FL despite using Springer forks instead of the large FL telescopic forks.[29]

In 2000, all Softails, including the FL models, were switched from the Evolution engine to the counterbalanced Twin Cam 88B engine specially developed for the rigid engine mounting in this frame.[16]

The FLSTN designation returned in 2005 with the Softail Deluxe.[30] The FLSTN Deluxe, which was introduced in 2005, also came with an option of carb or EFI models.[citation needed] The year 2005 was also the last in which a carb was offered on all HD big twin models.

FLD Dyna Switchback

Harley-Davidson introduced the FLD Dyna Switchback in 2012.[31] It is the first Dyna-series motorcycle to use FL-style forks and be given the FL designation.[citation needed]


  1. ^ Mitchell p. 95
  2. ^ a b c d e Mitchell pp. 134-135
  3. ^ Mitchell p. 141
  4. ^ a b c Palmer, Bruce (III). How To Restore your Harley-Davidson 1 (2nd ed. ed.). Palmer Publications. 
  5. ^ a b c d Field, Greg (2002). Original Harley-Davidson Panhead. St. Paul, MN US: MBI Publishing. p. 27. ISBN 0-7603-1062-9. 
  6. ^ Mitchell p. 150
  7. ^ Mitchell p. 164
  8. ^ Mitchell p. 186
  9. ^ Mitchell p. 158
  10. ^ Mitchell p. 206
  11. ^ The A-Z of Harley-Davidson Part Two
  12. ^ Mitchell p. 234
  13. ^ Mitchell p. 244
  14. ^ a b c Mitchell p. 258
  15. ^ Harley-Davidson Confederate Edition, Motorcycle Classics
  16. ^ a b c d e f g h i The A-Z of Harley-Davidson Part Three
  17. ^ Harley-Davidson Buyer's Guide: 1984-2011, p. 22
  18. ^ Mitchell p. 273
  19. ^ Mitchell p. 274
  20. ^ Edwards, David (October 1997). Edwards, David, ed. "Harley 1998: New Hogs Go To Market". Cycle World (Newport Beach, CA USA: Hachette Filipacchi Magazines) 36 (10): 26–27. ISSN 0011-4286. Retrieved 2013-05-04. Leading the way is the all-new FLTR Road Glide... Most obvious is the new frame-mounted fairing, a downsized, streamlined version of the bodywork first seen on the Tour Glide of 1980 
  21. ^ Edge, Alex (2006-08-04). Edge, Dirck, ed. "MD First Test: Harley-Davidson’s New Twin-Cam 96 Engine and Cruise Drive Six-Speed Transmission". Motorcycle Daily. Archived from the original on 2010-12-28. Retrieved 2013-05-04. 
  22. ^ Harley-Davidson 2009 model line
  23. ^ Edge, Dirck, Harley-Davidson Touring Models and V-Rod Muscle - MD First Rides
  24. ^ 2009 Harley-Davidson Tri Glide Ultra Classic
  25. ^ Mitchell p. 272
  26. ^ Mitchell p. 277
  27. ^ Mitchell p. 311
  28. ^ Mitchell p. 288
  29. ^ 2007 Harley-Davidson Softail Springer Classic specifications
  30. ^ 2007 Harley-Davidson Softail specifications
  31. ^ "2012 Harley-Davidson FLD Dyna Switchback". Total Motorcycle. 

Template:Harley-Davidson model families