Adverts

Open Access Articles- Top Results for Luminance

Luminance

Not to be confused with Luma (video) or Luminescence.
For other uses, see Luminance (disambiguation).

Luminance is a photometric measure of the luminous intensity per unit area of light travelling in a given direction. It describes the amount of light that passes through, is emitted or reflected from a particular area, and falls within a given solid angle. The SI unit for luminance is candela per square metre (cd/m2). A non-SI term for the same unit is the "nit". The CGS unit of luminance is the stilb, which is equal to one candela per square centimetre or 10 kcd/m2.

Explanation

Luminance is often used to characterize emission or reflection from flat, diffuse surfaces. The luminance indicates how much luminous power will be detected by an eye looking at the surface from a particular angle of view. Luminance is thus an indicator of how bright the surface will appear. In this case, the solid angle of interest is the solid angle subtended by the eye's pupil. Luminance is used in the video industry to characterize the brightness of displays. A typical computer display emits between 50 and 300Lua error: Unmatched close-bracket at pattern character 67.. The sun has luminance of about 1.6×109Lua error: Unmatched close-bracket at pattern character 67. at noon.[1]

Luminance is invariant in geometric optics. This means that for an ideal optical system, the luminance at the output is the same as the input luminance. For real, passive, optical systems, the output luminance is at most equal to the input. As an example, if you form a demagnified image with a lens, the luminous power is concentrated into a smaller area, meaning that the illuminance is higher at the image. The light at the image plane, however, fills a larger solid angle so the luminance comes out to be the same assuming there is no loss at the lens. The image can never be "brighter" than the source.

Definition

Luminance is defined [2] by the derivative

<math>L_\mathrm{v} = \frac{\mathrm{d}^2 \Phi_\mathrm{v}}{\mathrm{d}A\,\mathrm{d}{\Omega} \cos \theta}</math>

where

<math>L_\mathrm{v}</math> is the luminance (cd/m2),
<math>\Phi_\mathrm{v}</math> is the luminous flux or luminous power (lm),
<math>\theta\,</math> is the angle between the surface normal and the specified direction,
<math>A</math> is the area of the surface (m2), and
<math>\Omega\,</math> is the solid angle (sr).

The expression is written using Leibniz's notation.

Units

A variety of units have been used for luminance, besides the candela per square metre.

One candela per square metre is equal to:

Health effects

See also: Laser safety

Retinal damage can occur when the eye is exposed to high luminance. Damage can occur due to local heating of the retina. Photochemical effects can also cause damage, especially at short wavelengths.

See also

SI photometry quantities

Quantity Unit Dimension Notes
Name Symbol[nb 1] Name Symbol Symbol
Luminous energy Qv [nb 2] lumen second lm⋅s TJ [nb 3] Units are sometimes called talbots.
Luminous flux / Luminous power Φv [nb 2] lumen (= cd⋅sr) lm J [nb 3] Luminous energy per unit time.
Luminous intensity Iv candela (= lm/sr) cd J [nb 3] Luminous power per unit solid angle.
Luminance Lv candela per square metre cd/m2 L−2J Luminous power per unit solid angle per unit projected source area. Units are sometimes called nits.
Illuminance Ev lux (= lm/m2) lx L−2J Luminous power incident on a surface.
Luminous exitance / Luminous emittance Mv lux lx L−2J Luminous power emitted from a surface.
Luminous exposure Hv lux second lx⋅s L−2TJ
Luminous energy density ωv lumen second per cubic metre lm⋅s⋅m−3 L−3TJ
Luminous efficacy η [nb 2] lumen per watt lm/W L−2M−1T3J Ratio of luminous flux to radiant flux.
Luminous efficiency / Luminous coefficient V 1
See also: SI · Photometry · Radiometry
  1. ^ Standards organizations recommend that photometric quantities be denoted with a suffix "v" (for "visual") to avoid confusion with radiometric or photon quantities. For example: USA Standard Letter Symbols for Illuminating Engineering USAS Z7.1-1967, Y10.18-1967
  2. ^ a b c Alternative symbols sometimes seen: W for luminous energy, P or F for luminous flux, and ρ or K for luminous efficacy.
  3. ^ a b c "J" here is the symbol for the dimension of luminous intensity, not the symbol for the unit joules.

References

  1. ^ "Luminance". Lighting Design Glossary. Retrieved Apr 13, 2009. 
  2. ^ Chaves, Julio (2008). "Introduction to Nonimaging Optics". Optical Science and Engineering 134. CRC Press. p. 449. ISBN 9781420054293. 

External links