Frequent Links
Pascal (unit)
This article needs additional citations for verification. (October 2011) 
Pascal  

250px A pressure gauge reading in psi (red scale) and kPa (black scale)  
Unit information  
Unit system  SI derived unit 
Unit of  Pressure or stress 
Symbol  Pa 
Named after  Blaise Pascal 
In SI base units:  1 Pa = 1 kg/(m·s^{2}) 
The pascal (symbol: Pa) is the SI derived unit of pressure, internal pressure, stress, Young's modulus and ultimate tensile strength, defined as one newton per square metre.^{[1]} It is named after the French polymath Blaise Pascal.
Common multiple units of the pascal are the hectopascal (1 hPa ≡ 100 Pa) which is equal to 1 mbar, the kilopascal (1 kPa ≡ 1000 Pa), the megapascal (1 MPa ≡ 1,000,000 Pa), and the gigapascal (1 GPa ≡ 1,000,000,000 Pa).
The unit of measurement called standard atmosphere (atm) is defined as 101.325 kPa and approximates to the average pressure at sealevel at 45° N.^{[2]} Meteorological reports typically state atmospheric pressure in hectopascals.^{[3]}
Contents
Etymology
The unit is named after Blaise Pascal, noted for his experiments with a barometer. The name pascal was adopted for the SI unit newton per square metre (N/m^{2}) by the 14th General Conference on Weights and Measures in 1971.^{[4]}
Definition
The pascal can be expressed using SI derived units, or alternatively solely SI base units, as:
 <math>{\rm 1~Pa = 1~\frac{N}{m^2} = 1~\frac{kg}{m \cdot s^2}}</math>^{[5]}
Where N is the newton, m is the metre, kg is the kilogram and s is the second.
Miscellaneous
The unit of measurement called atmosphere or standard atmosphere (atm) is Script error: No such module "convert"..^{[6]} This value is often used as a reference pressure and specified as such in some national and international standards, such as ISO 2787 (pneumatic tools and compressors), ISO 2533 (aerospace) and ISO 5024 (petroleum). In contrast, IUPAC recommends the use of 100 kPa as a standard pressure when reporting the properties of substances.^{[7]}
The Unicode computer character set has dedicated symbols ㎩ (U+33A9) for Pa and ㎪ (U+33AA) for kPa, but these exist merely for backwardcompatibility with some older ideographic charactersets and are therefore deprecated.
Uses
The pascal (Pa) or kilopascal (kPa) as a unit of pressure measurement is widely used throughout the world and has largely replaced the pounds per square inch (psi) unit, except in some countries that still use the Imperial measurement system, including the United States.
Geophysicists use the gigapascal (GPa) in measuring or calculating tectonic stresses and pressures within the Earth.
Medical elastography measures tissue stiffness noninvasively with ultrasound or magnetic resonance imaging, and often displays the Young's modulus or shear modulus of tissue in kilopascals.
In materials science and engineering, the pascal measures the stiffness, tensile strength and compressive strength of materials. In engineering use, because the pascal represents a very small quantity, the megapascal (MPa) is the preferred unit for these uses.
Material  Young's modulus 

nylon 6  2–4 GPa 
hemp fibre  35 GPa 
aluminium  69 GPa 
tooth enamel  83 GPa 
copper  117 GPa 
structural steel  200 GPa 
diamond  1220 GPa 
The pascal is also equivalent to the SI unit of energy density, J/m^{3}. This applies not only to the thermodynamics of pressurized gases, but also to the energy density of electric, magnetic, and gravitational fields.
In measurements of sound pressure, or loudness of sound, one pascal is equal to 94 decibels SPL. The quietest sound a human can hear, known as the threshold of hearing, is 0 dB SPL, or 20 µPa.
The airtightness of buildings is measured at 50 Pa.^{[9]}
Hectopascal and millibar units
The units of atmospheric pressure commonly used in meteorology were formerly the bar, which was close to the average air pressure on Earth, and the millibar. Since the introduction of SI units, meteorologists generally measure pressures in hectopascals (hPa) unit, equal to 100 pascals or 1 millibar.^{[10]}^{[11]}^{[12]}^{[13]}^{[14]}^{[15]}^{[16]} Exceptions include Canada and Portugal, which uses kilopascals (kPa). It should be noted that in many other fields of science, the SI is preferred, which means Pa with a prefix (in multiples of 3) is preferred.^{[17]}^{[18]}
Many countries also use the millibar or hectopascal to give aviation altimeter settings. In practically all other fields, the kilopascal (1000 pascals) is used instead.
See also
Notes and references
 ↑ International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 118, ISBN 9282222136
 ↑ BIPM Definition of the standard atmosphere "Definition of the standard atmosphere". Retrieved 16 February 2015.
 ↑ U.S. Federal Meteorological Handbook
 ↑ bipm.fr
 ↑ Table 3 (Section 2.2.2), SI Brochure, International Bureau of Weights and Measures
 ↑ "Resolution 4 of the 10th meeting of the CGPM". Conférence Générale des Poids et Mesures (CGPM). 1954. Retrieved 5 April 2010.
 ↑ IUPAC.org, Gold Book, Standard Pressure
 ↑ "Tensile Modulus  Modulus of Elasticity or Young's Modulus  for some common Materials". Retrieved 16 February 2015.
 ↑ "Chapter 7 ResNet Standards: ResNet National Standard for Home Energy Audits" (PDF). ResNet. 2010. Retrieved 3 March 2011.
 ↑ KNMI
 ↑ RMI
 ↑ DWD
 ↑ JMA
 ↑ MDD
 ↑ NOAA
 ↑ UK Met Office
 ↑ CTV News, weather; current conditions in Montreal
 ↑ Environment Canada weather, current conditions in Montreal
