Podocarpus totara (tōtara) is a species of podocarp tree endemic to New Zealand. It grows throughout the North Island and northeastern South Island in lowland, montane and lower subalpine forest at elevations of up to 600 m.
Tōtara is commonly found in lowland areas where the soil is fertile and well drained.
The tōtara is a medium to large tree which grows slowly to around 20 to 25 m, exceptionally to 35 m; it is noted for its longevity and the great girth of its trunk. The bark peels off in papery flakes, with a purplish to golden brown hue. The sharp, dull green needle-like leaves are stiff and leathery, 2 cm long. This plant produces highly modified cones with 2 to 4 fused, fleshy berry-like juicy scales, bright red when mature. The cone contains one or two rounded seeds at the apex of the scales.
The largest known living tōtara, the Pouakani Tree, near Pureora in the central North Island is over 35 meters tall and nearly 4 meters in trunk diameter at breast height. Other large trees are known in this area, while Whirinaki forest, to the East, but also on deep recent volcanic soils, has groves of very tall tōtara (over 40m in height).
Tōtara is often found regenerating on farmland as it's not eaten by livestock.
In a classic example of Antarctic flora species-pair the tōtara is very closely related to Podocarpus nubigenus from South America, to the extent that if planted together, they are very difficult to distinguish. The best distinction is the grey-green tone of the leaves, compared to the slightly brighter green of P. nubigenus.
Cultivation and uses
The wood is hard, straight-grained and very resistant to rot, especially its heartwood. Due to its durability, tōtara wood was often used for fence posts, floor pilings and railway sleepers. It is also prized for its carving properties, and was the primary wood used in Māori carving. It was the primary wood used to make waka in traditional Maori boat building due to its relatively light weight (about 25% lighter than Kauri), long straight lengths and natural oils in the wood which help prevent rotting. Tōtara could be drilled with chert points to make holes near the edges of the timber without splitting. In larger tōtara waka, three or more sections were laced together with flax rope. A tōtara waka took at least a year to make using stone adzes.
Several cultivars for garden use have been introduced. These include 'Albany Gold' and 'Aurea', both have which have yellow gold foliage that darkens in winter; 'Pendula', which has a weeping growth habit that is especially pronounced in young plants; 'Silver Falls', also pendulous but with cream-edged foliage; and 'Matapouri Blue', which has a conical form and glaucous foliage.
Receptacle and seed of tōtara
The reddish-grey bark of the tōtara is thick, corky, furrowed and stringy
- "Story: Conifers – Tōtara group". Te Ara - the Encyclopedia of New Zealand. Retrieved 30 September 2012.
- "Podocarpus totara var. totara". New Zealand Plant Conservation Network. Retrieved 23 September 2012.
- "Half-hardy trees in Britain and Ireland – part two" (PDF). Royal Horticultural Society. Retrieved 2009-06-18.[dead link]
|40x40px||Wikimedia Commons has media related to Podocarpus totara.|
- Conifer Specialist Group (1998). Podocarpus totara. 2006. IUCN Red List of Threatened Species. IUCN 2006. www.iucnredlist.org. Retrieved on 12 May 2006..
- New Zealand Plant Conservation Network, URL:Podocarpus totara var. totara. Accessed 2010-10-03.
- New Zealand Plant Conservation Network, URL:Podocarpus totara var. waihoensis. Accessed 2010-10-03.