Journals

Conferences

Open Access Articles- Top Results for Remington Model 10

Remington Model 10

Template:Infobox Weapon

The Remington Model 10 is a pump-action shotgun designed by John Pedersen[1] with an internal hammer and a tube magazine which loaded and ejected from a port in the bottom of the receiver.[2] An updated version, the Model 29, was introduced in 1930 with improvements made by C.C. Loomis.[3]

Military use

The United States military used a short-barreled version known variously as the "trench" or "riot" shotgun.[4] The Winchester Model 1897 was the major production, but Remington made 3500 of the Model 10-A version for issue to U.S. troops during World War I.[4] The Model 10 was modified by reducing barrel length to 23 inches (58 cm) and adding sling swivels, a wooden heat shield over the barrel, and an adapter with bayonet lug for affixing a M1917 bayonet.[4] These trench guns with serial numbers between 128000 and 166000 were stamped with US and the flaming bomb insignia on the left side of the receiver.[2] The United States military also purchased a number of Remington Model 10 with 20-inch (51-cm) barrels for guarding prisoners, and 26 to 30-inch (66 to 76-cm) barrels for training aerial gunners.[4] The Model 10-A was used in limited numbers by the Marine Corps through the 1930s.[4]

References

  1. ^ Cite error: The named reference Rem was invoked but never defined (see the help page).
  2. ^ a b Bruce N. Canfield "Give Us More Shotguns!" American Rifleman May 2004 pp.58-63
  3. ^ Cite error: The named reference web was invoked but never defined (see the help page).
  4. ^ a b c d e Bruce N. Canfield "Remington's Model 10: The Other Trench Gun" American Rifleman November 2009 pp.74-107