Steam - Related Links
Open Access Articles- Top Results for Steam
Journal of Aquaculture Research & DevelopmentComparison of Two Isolation Methods for Essential Oils from Orange Peel (Citrus auranticum L) as a Growth Promoter for Fish: Microwave Steam Distill
International Journal of Advancements in TechnologyMonitoring and Control of an In-House Steam Power Plant: A Support of the Idea of Distributed Power Generation
Fluid Mechanics: Open AccessPrevious Kondratieff Cycles: Many Positive and Some Negative Effects, and a Hopeful Outlook in the Short Kondratieff Cycle
Journal of Fundamentals of Renewable Energy and ApplicationsStored Heat Evaluation in Geothermal Systems: A Case of a Mexican Field
Journal of Biosensors & BioelectronicsOriginal Covalent Approach for Gold Nanorods Immobilization onto Acid-Terminated-Cysteamine Self-Assembled Monolayers for FT-SPR Biosensor Applicatio
Steam is a term for the gaseous phase of water, which is formed when water boils. Steam is invisible; however, "steam" incorrectly often refers to the visible mist or aerosol of water droplets formed as this water vapor condenses. At lower pressures, such as in the upper atmosphere or at the top of high mountains, water boils at a lower temperature than the nominal Script error: No such module "convert". at standard temperature and pressure. If heated further it becomes superheated steam.
The enthalpy of vaporization is the energy required to turn water into the gaseous form when it increases in volume by 1,700 times at standard temperature and pressure; this change in volume can be converted into mechanical work by steam engines such as reciprocating piston type engines and steam turbines, which are a sub-group of steam engines. Piston type steam engines played a central role to the Industrial Revolution and modern steam turbines are used to generate more than 80% of the world's electricity. If liquid water comes in contact with a very hot substance (such as lava, or molten metal) it can create a steam explosion. Steam explosions have been responsible for many foundry accidents, and may also have been responsible for much of the damage to the plant in the Chernobyl disaster.
- 1 Types of steam and conversions
- 2 Uses
- 3 See also
- 4 References
- 5 External links
Types of steam and conversions
Steam is traditionally created by heating a boiler via burning coal and other fuels, but it is also possible to create steam with solar energy. Water vapor that includes water droplets is described as wet steam. As wet steam is heated further, the droplets evaporate, and at a high enough temperature (which depends on the pressure) all of the water evaporates and the system is in vapor–liquid equilibrium.
Steam tables  contain thermodynamic data for water/steam and are often used by engineers and scientists in design and operation of equipment where thermodynamic cycles involving steam are used. Additionally, thermodynamic phase diagrams for water/steam, such as a temperature-entropy diagram or a Mollier diagram shown in this article, may be useful. Steam charts are also used for analysing thermodynamic cycles.
|enthalpy-entropy (h-s) diagram for steam||pressure-enthalpy (p-h) diagram for steam||temperature-entropy (T-s) diagram for steam|
Steam's capacity to transfer heat is also used in the home: for cooking vegetables, steam cleaning of fabric and carpets, and heating buildings. In each case, water is heated in a boiler, and the steam carries the energy to a target object. "Steam showers" are actually low-temperature mist-generators, and do not actually use steam.
Electricity generation (and cogeneration)
In electric generation, steam is typically condensed at the end of its expansion cycle, and returned to the boiler for re-use. However in cogeneration, steam is piped into buildings through a district heating system to provide heat energy after its use in the electric generation cycle. The world's biggest steam generation system is the New York City steam system, which pumps steam into 100,000 buildings in Manhattan from seven cogeneration plants.
|This section does not cite any references or sources. (September 2013)|
In other industrial applications steam is used for energy storage, which is introduced and extracted by heat transfer, usually through pipes. Steam is a capacious reservoir for thermal energy because of water's high heat of vaporization.
Fireless steam locomotives were steam locomotives that operated from a supply of steam stored on board in a large tank resembling a conventional locomotive's boiler. This tank was filled by process steam, as is available in many sorts of large factory, such as paper mills. The locomotive's propulsion used pistons and connecting rods, as for a typical steam locomotive. These locomotives were mostly used in places where there was a risk of fire from a boiler's firebox, but were also used in factories that simply had a plentiful supply of steam to spare.
Owing to its low molecular mass, steam is an effective lifting gas, providing approximately 60% as much lift as helium and twice as much as hot air. It is not flammable, unlike hydrogen, and is cheap and abundant, unlike helium. The required heat, however, leads to condensation problems and requires an insulated envelope. These factors have limited its use thus far to mostly demonstration projects.
|This section does not cite any references or sources. (September 2013)|
A steam engine and steam turbines use the expansion of steam to drive a piston or turbine to perform mechanical work. The ability to return condensed steam as water-liquid to the boiler at high pressure with relatively little expenditure of pumping power is important. Condensation of steam to water often occurs at the low-pressure end of a steam turbine, since this maximizes the energy efficiency, but such wet-steam conditions must be limited to avoid excessive turbine blade erosion. Engineers use an idealised thermodynamic cycle, the Rankine cycle, to model the behavior of steam engines. Steam turbines are often used in the production of electricity.
Steam in piping
Steam is used in the process of wood bending, killing insects and increasing plasticity.
Steam is used to accentuate drying especially in prefabricates. Care should be taken since concrete produces heat during hydration and additional heat from the steam could be detrimental to hardening reaction processes of the concrete.
Used in cleaning of fibers, sometimes prior to painting.
|40x40px||Wikimedia Commons has media related to Steam.|
|40x40px||Wikimedia Commons has media related to Water vapor.|
- Food steamer or steam cooker
- Geyser—geothermally-generated steam
- IAPWS—an association that maintains international-standard correlations for the thermodynamic properties of steam, including IAPWS-IF97 (for use in industrial simulation and modelling) and IAPWS-95 (a general purpose and scientific correlation).
- Industrial Revolution
- Live steam
- Mass production
- Nuclear power—and power plants use steam to generate electricity
- Psychrometrics—moist air/vapor mixtures, humidity and air conditioning
- Steam locomotive
- Taylor, Robert A.; Phelan, Patrick E.; Adrian, Ronald J.; Gunawan, Andrey; Otanicar, Todd P. (2012). "Characterization of light-induced, volumetric steam generation in nanofluids". International Journal of Thermal Sciences 56: 1–11. doi:10.1016/j.ijthermalsci.2012.01.012.
- Taylor, Robert A.; Phelan, Patrick E.; Otanicar, Todd P.; Walker, Chad A.; Nguyen, Monica; Trimble, Steven; Prasher, Ravi (2011). "Applicability of nanofluids in high flux solar collectors". Journal of Renewable and Sustainable Energy 3 (2): 023104. doi:10.1063/1.3571565.
- Taylor, Robert A.; Phelan, Patrick E.; Otanicar, Todd; Adrian, Ronald J.; Prasher, Ravi S. (2009). "Vapor generation in a nanoparticle liquid suspension using a focused, continuous laser". Applied Physics Letters 95 (16): 161907. Bibcode:2009ApPhL..95p1907T. doi:10.1063/1.3250174.
- Singh, R Paul (2001). Introduction to Food Engineering. Academic Press. ISBN 978-0-12-646384-2.[page needed]
- "Superheated Steam". Spirax-Sarco Engineering.
- Malhotra, Ashok (2012). Steam Property Tables: Thermodynamic and Transport Properties. ISBN 978-1-479-23026-6.[page needed]
- Wiser, Wendell H. (2000). "Energy Source Contributions to Electric Power Generation". Energy resources: occurrence, production, conversion, use. Birkhäuser. p. 190. ISBN 978-0-387-98744-6.
- Bevelhymer, Carl (November 10, 2003). "Steam". Gotham Gazette.
- "Steam Balloon JBFA Article".[self-published source?]
- EP Patent Publication 2,091,572
- Song, Liyan; Wu, Jianfeng; Xi, Chuanwu (2012). "Biofilms on environmental surfaces: Evaluation of the disinfection efficacy of a novel steam vapor system". American Journal of Infection Control 40 (10): 926–30. PMID 22418602. doi:10.1016/j.ajic.2011.11.013.
|40x40px||Look up steam in Wiktionary, the free dictionary.|