Open Access Articles- Top Results for Street light
International Journal of Advanced Research in Electrical, Electronics and Instrumentation EnergyE Street: LED Powered Intelligent Street Lighting System with Automatic Brightness Adjustment Based On Climatic Conditions and Vehicle Movements
International Journal of Advanced Research in Electrical, Electronics and Instrumentation EnergyPower Effective Wireless Street Light Control
International Journal of Advanced Research in Electrical, Electronics and Instrumentation EnergyANALYSIS OF SOLAR ENERGY BASED STREET LIGHT WITH AUTO TRACKING SYSTEM
International Journal of Advanced Research in Electrical, Electronics and Instrumentation EnergyAdvancements in Solar based LED Street light
A street light, lamppost, street lamp, light standard, or lamp standard is a raised source of light on the edge of a road or walkway. Modern lamps may also have light-sensitive photocells that activate automatically when light is or is not needed: dusk, dawn, or the onset of dark weather. This function in older lighting systems could have been performed with the aid of a solar dial. Many street light systems are being connected underground instead of wiring from one utility post to another.
- 1 History
- 2 Modern lights
- 3 Measurement
- 4 Advantages
- 5 Disadvantages
- 6 Purpose
- 7 Street light control systems
- 8 Maintenance
- 9 Main manufacturers
- 10 See also
- 11 References
- 12 Bibliography
- 13 Further reading
- 14 External links
Early lamps were used by Greek and Roman civilizations, where light primarily served the purpose of security, both to protect the wanderer from tripping on the path over something or keeping the potential robbers at bay. At that time oil lamps were used predominantly as they provided a long-lasting and moderate flame. The Romans had a word 'laternarius', which was a term for a slave responsible for lighting the oil lamps in front of their villas. This task remained the responsibility of a designated person up to the Middle Ages where the so-called 'link boys' escorted people from one place to another through the murky winding streets of medieval towns.
Before incandescent lamps, candle lighting was employed in cities. The earliest lamps required that a lamplighter tour the town at dusk, lighting each of the lamps, but later designs employed ignition devices that would automatically strike the flame when the gas supply was activated. The earliest of such street lamps were built in the Arab Empire, especially in Córdoba, Spain, Cairo, Egypt, and Baghdad, Iraq ( around 1000 AD ).[unreliable source?]
It is generally accepted that public illumination was ordered in London in 1417 by Sir Henry Barton, Mayor of London though there is no firm evidence of this. Paris was first lit by an order issued in 1524, and, in the beginning of the 16th century, the inhabitants were ordered to keep lights burning in the windows of all houses that faced the streets. By an Act of the Common Council in 1716, all housekeepers, whose houses faced any street, lane, or passage, were required to hang out, every dark night, one or more lights, to burn from six to eleven o'clock, under threat of a penalty of one shilling as a fine for failing to do so.
The first widespread system of street lighting used piped coal gas as fuel. Stephen Hales was the first person who procured a flammable fluid from the actual distillation of coal in 1726 and John Clayton, in 1735, called gas the "spirit" of coal and discovered its flammability by an accident.
William Murdoch (sometimes spelled "Murdock") was the first to use the flammability of gas for the practical application of lighting. In the early 1790s, while overseeing the use of his company's steam engines in tin mining in Cornwall, Murdoch began experimenting with various types of gas, finally settling on coal-gas as the most effective. He first lit his own house in Redruth, Cornwall in 1792. In 1798, he used gas to light the main building of the Soho Foundry and in 1802 lit the outside in a public display of gas lighting, the lights astonishing the local population.
The first public street lighting with gas was demonstrated in Pall Mall, London on January 28, 1807 by Frederick Albert Winsor. In 1812, Parliament granted a charter to the London and Westminster Gas Light and Coke Company, and the first gas company in the world came into being. Less than two years later, on December 31, 1813, the Westminster Bridge was lit by gas.
Following this success, gas lighting spread to other countries. The use of gas lights in Rembrandt Peale's Museum in Baltimore in 1816 was a great success. Baltimore was the first American city with gas streetlights, provided by Peale's Gas Light Company of Baltimore.
The first place outside of London in England to have gas lighting, was Preston, Lancashire in 1825, this was due to the Preston Gaslight Company run by revolutionary Joseph Dunn, who found the most improved way of brighter gas lighting.
Oil-gas appeared in the field as a rival of coal-gas. In 1815, John Taylor patented an apparatus for the decomposition of "oil" and other animal substances. Public attention was attracted to "oil-gas" by the display of the patent apparatus at Apothecary's Hall, by Taylor & Martineau.
The first modern street lamps to use kerosene were introduced in Lviv in what was then the Austrian Empire in 1853. In Brest, street lighting with kerosene lamps reappeared in 2009 in the shopping street as a tourist attraction.
Farola fernandina is a traditional design of street light which remains Popular in Spain. Essentially it is a neo-classical French gas lamp style dating from the late 18th century. It may be either a wall-bracket or standard lamp. The standard base is cast metal with an escutchion bearing two intertwined letters 'F', the Royal cypher of King Ferdinand VII of Spain and commemorates the date of the birth of his daughter, the Infanta Luisa Fernanda, Duchess of Montpensier.
- Base de farola fernandina.jpg
The usual base and escutcheon of a farola fernandina.
- Aranjuez FarolaFernandina.jpg
A farola fernandina in Aranjuez
- Aranjuez PalacioReal Farola.jpg
Street light in Ferdinand VII's style near the Royal Palace of Aranjuez
Arc lamps and incandescent lighting
The first electric street lighting employed arc lamps, initially the 'Electric candle', 'Jablotchkoff candle' or 'Yablochkov candle' developed by the Russian Pavel Yablochkov in 1875. This was a carbon arc lamp employing alternating current, which ensured that both electrodes were consumed at equal rates. In 1876, the common council of the City of Los Angeles ordered four arc lights installed in various places in the fledgling town for street lighting.
On May 30, 1878, the first electric street lights in Paris were installed on the avenue de l'Opera and the Place d'Etoile, around the Arc de Triomphe, to celebrate the opening of the Paris Universal Exposition. In 1881, to coincide with the Paris International Exposition of Electricity, street lights were installed on the major boulevards. 
The first streets in London lit with the electrical arc lamp were by the Holborn Viaduct and the Thames Embankment in 1878. More than 4,000 were in use by 1881, though by then an improved differential arc lamp had been developed by Friedrich von Hefner-Alteneck of Siemens & Halske. The United States was quick in adopting arc lighting, and by 1890 over 130,000 were in operation in the US, commonly installed in exceptionally tall moonlight towers.
Arc lights had two major disadvantages. First, they emit an intense and harsh light which, although useful at industrial sites like dockyards, was discomforting in ordinary city streets. Second, they are maintenance-intensive, as carbon electrodes burn away swiftly. With the development of cheap, reliable and bright incandescent light bulbs at the end of the 19th century, arc lights passed out of use for street lighting, but remained in industrial use longer.
The first street to be lit by an incandescent lightbulb was Mosley Street, in Newcastle upon Tyne. The street was lit by Joseph Swan's incandescent lamp on 3 February 1879. Consequently, Newcastle was one of the first cities in the world to be fully lit up by lighting. The first in the United States, and second overall, was the Public Square road system in Cleveland, Ohio, on April 29, 1879. Wabash, Indiana holds the title of being the third electrically lit city in the world, which took place on February 2, 1880. Four 3,000 candlepower Brush arc lamps suspended over the courthouse rendered the town square "as light as midday." Kimberley, South Africa, was the first city in the Southern Hemisphere and in Africa to have electric street lights - first lit on 1 September 1882 . In Latin America, San Jose, Costa Rica was the first city, the system was launched on August 9, 1884, with 25 lamps powered by a hydroelectric plant.
Temesvár in the Kingdom of Hungary (now Timisoara, in present-day Romania), was the first city in Continental Europe to have electric public lighting on 12 November 1884. 731 lamps were used. On 9 December 1882, Brisbane, Queensland, Australia was introduced to electricity by having a demonstration of using eight arc lights, erected along Queen Street. The power to supply these arc lights was taken from a 10 hp Crompton DC generator driven by a Robey steam engine in a small foundry in Adelaide Street and occupied by J. W. Sutton & Co. The lamps were erected on cast iron standards, 20 ft in height. In 1888 Tamworth, New South Wales, Australia became the first location in Australia to have electric street lighting, giving the city the title of "First City of Light".
Incandescent lamps were primarily used for street lighting until the advent of high-intensity discharge lamps. They were often operated at high-voltage series circuits. Series circuits were popular since the higher voltage in these circuits produced more light per watt consumed. Furthermore, before the invention of photoelectric controls, a single switch or clock could control all the lights in an entire district.
To avoid having the entire system go dark if a single lamp burned out, each street lamp was equipped with a device that ensured that the circuit would remain intact. Early series street lights were equipped with isolation transformers. that would allow current to pass across the transformer whether the bulb worked or not. Later the film cutout was invented. The film cutout was a small disk of insulating film that separated two contacts connected to the two wires leading to the lamp. If the lamp failed (an open circuit), the current through the string became zero, causing the voltage of the circuit (thousands of volts) to be imposed across the insulating film, penetrating it (see Ohm's law). In this way, the failed lamp was bypassed and power restored to the rest of the district. The street light circuit contained an automatic current regulator, preventing the current from increasing as lamps burned out, preserving the life of the remaining lamps. When the failed lamp was replaced, a new piece of film was installed, once again separating the contacts in the cutout. This system was recognizable by the large porcelain insulator separating the lamp and reflector from the mounting arm. This was necessary because the two contacts in the lamp's base may have operated at several thousand volts above ground/earth.
Today, street lighting commonly uses high-intensity discharge lamps, often HPS high pressure sodium lamps. Such lamps provide the greatest amount of photopic illumination for the least consumption of electricity. However, white light sources have been shown to double driver peripheral vision and improve driver brake reaction time by at least 25%; to enable pedestrians to better detect pavement trip hazards and to facilitate visual appraisals of other people associated with interpersonal judgements. Studies comparing metal halide and high-pressure sodium lamps have shown that at equal photopic light levels, a street scene illuminated at night by a metal halide lighting system was reliably seen as brighter and safer than the same scene illuminated by a high pressure sodium system.
Two national standards now allow for variation in illuminance when using lamps of different spectra. In Australia, HPS lamp performance needs to be reduced by a minimum value of 75%. In the UK, illuminances are reduced with higher values S/P ratio
New street lighting technologies, such as LED or induction lights, emit a white light that provides high levels of scotopic lumens allowing street lights with lower wattages and lower photopic lumens to replace existing street lights. However, there have been no formal specifications written around Photopic/Scotopic adjustments for different types of light sources, causing many municipalities and street departments to hold back on implementation of these new technologies until the standards are updated. Eastbourne in East Sussex UK is currently undergoing a project to see 6000 of its street lights converted to LED and will be closely followed by Hastings in early 2014.
In 2007, the Civil Twilight Collective created a variant of the conventional LED streetlight, namely the Lunar-resonant streetlight. These lights increase or decrease the intensity of the streetlight according to the lunar light. This streetlight design thus reduces energy consumption as well as light pollution.
Two very similar measurement systems were created to bridge the scotopic and photopic luminous efficiency functions, creating a Unified System of Photometry. This new measurement has been well-received because the reliance on V(λ) alone for characterizing night-time light illuminations requires more electric energy. The cost-savings potential of using a new way to measure mesopic lighting scenarios is tremendous.
Outdoor Site-Lighting Performance (OSP) is a method for predicting and measuring three different aspects of light pollution: glow, trespass and glare. Using this method, lighting specifiers can quantify the performance of existing and planned lighting designs and applications to minimize excessive or obtrusive light leaving the boundaries of a property.
Major advantages of street lighting include prevention of accidents and increase in safety. Studies have shown that darkness results in a large number of crashes and fatalities, especially those involving pedestrians; pedestrian fatalities are 3 to 6.75 times more likely in the dark than in daylight. Street lighting has been found to reduce pedestrian crashes by approximately 50%.
Furthermore, lighted intersections and highway interchanges tend to have fewer crashes than unlighted intersections and interchanges.
Towns, cities, and villages use the unique locations provided by lampposts to hang decorative or commemorative banners.
Many communities in the U.S. use lampposts as a tool for fund raising via lamppost banner sponsorship programs first designed by a U.S. based lamppost banner manufacturer.
The major criticisms of street lighting are that it can actually cause accidents if misused, and cause light pollution.
There are two optical phenomena that need to be recognized in street light installations.
- The loss of night vision because of the accommodation reflex of drivers' eyes is the greatest danger. As drivers emerge from an unlighted area into a pool of light from a street light their pupils quickly constrict to adjust to the brighter light, but as they leave the pool of light the dilation of their pupils to adjust to the dimmer light is much slower, so they are driving with impaired vision. As a person gets older the eye's recovery speed gets slower, so driving time and distance under impaired vision increases.
- Oncoming headlights are more visible against a black background than a grey one. The contrast creates greater awareness of the oncoming vehicle.
- Stray voltage is also a concern in many cities. Stray voltage can accidentally electrify lampposts and has the potential to injure or kill anyone who comes into contact with the post. Some cities have employed the Electrified Cover Safeguard technology which sounds an alarm and flashes a light, to warn the public, when a lamppost becomes dangerously electrified.
There are also physical dangers other than children climbing them for recreational purposes. Street light stanchions (lampposts) pose a collision risk to motorists and pedestrians, particularly those affected by poor eyesight or under the influence of alcohol. This can be reduced by designing them to break away when hit (frangible or collapsible supports), protecting them by guardrails, or marking the lower portions to increase their visibility. High winds or accumulated metal fatigue also occasionally topple street lights.
In urban areas light pollution can hide the stars and interfere with astronomy and the migration of many bird species. In settings near astronomical telescopes and observatories, low pressure sodium lamps may be used. These lamps are advantageous over other lamps such as mercury and metal halide lamps because low pressure sodium lamps emit lower intensity, monochromatic light. Observatories can filter the sodium wavelength out of their observations and virtually eliminate the interference from nearby urban lighting. Full cutoff streetlights also reduce light pollution by reducing the amount of light that is directed at the sky which also improves the luminous efficiency of the light.
There are three distinct main uses of street lights, each requiring different types of lights and placement. Misuse of the different types of lights can make the situation worse by compromising visibility or safety.
A modest steady light at the intersection of two roads is an aid to navigation because it helps a driver see the location of a side road as they come closer to it and they can adjust their braking and know exactly where to turn if they intend to leave the main road or see vehicles or pedestrians. A beacon light's function is to say "here I am" and even a dim light provides enough contrast against the dark night to serve the purpose. To prevent the dangers caused by a car driving through a pool of light, a beacon light must never shine onto the main road, and not brightly onto the side road. In residential areas, this is usually the only appropriate lighting, and it has the bonus side effect of providing spill lighting onto any sidewalk there for the benefit of pedestrians. On Interstate highways this purpose is commonly served by placing reflectors at the sides of the road.
Because of the dangers discussed above, roadway lights are properly used sparingly and only when a particular situation justifies increasing the risk. This usually involves an intersection with several turning movements and much signage, situations where drivers must take in much information quickly that is not in the headlights' beam. In these situations (A freeway junction or exit ramp) the intersection may be lit so that drivers can quickly see all hazards, and a well designed plan will have gradually increasing lighting for approximately a quarter of a minute before the intersection and gradually decreasing lighting after it. The main stretches of highways remain unlighted to preserve the driver's night vision and increase the visibility of oncoming headlights. If there is a sharp curve where headlights will not illuminate the road, a light on the outside of the curve is often justified.
If it is desired to light a roadway (perhaps due to heavy and fast multi-lane traffic), to avoid the dangers of casual placement of street lights it should not be lit intermittently, as this requires repeated eye readjustment which implies eyestrain and temporary blindness when entering and leaving light pools. In this case the system is designed to eliminate the need for headlights. This is usually achieved with bright lights placed on high poles at close regular intervals so that there is consistent light along the route. The lighting goes from curb to curb.
For more information, see the lighting section of "Pedestrian Crossings" article.
Street light control systems
A number of street light control systems have been developed to control and reduce energy consumption of a town's public lighting system. These range from controlling a circuit of street lights and/or individual lights with specific ballasts and network operating protocols. These may include sending and receiving instructions via separate data networks,at high frequency over the top of the low voltage supply or wireless.
Image-based street light control
A number of companies are now manufacturing Intelligent street lighting that adjust light output based on usage and occupancy, i.e. automating classification of pedestrian versus cyclist, versus automotive, sensing also velocity of movement and illuminating a certain number of streetlights ahead and fewer behind, depending on velocity of movement. Also the lights adjust depending on road conditions, for example, snow produces more reflectance therefore reduced light is required.
Street lighting systems require ongoing maintenance, which can be classified as either reactive or preventative. Reactive maintenance is a direct response to a lighting failure, such as replacing a discharge lamp after it has failed, or replacing an entire lighting unit after it has been hit by a vehicle. Preventative maintenance is scheduled replacement of lighting components, for example replacing all of the discharge lamps in an area of the city when they have reached 85% of their expected life. In the United Kingdom the Roads Liaison Group has issued a Code of Practice recommending specific reactive and preventative maintenance procedures.
Some street lights have a light status. An example is in New York City where street light lamps are equipped with sensors. When the red indicator on top of the light flashes, it indicates that the light needs to have a repair.
- North America
- American Electric Lighting (formerly ITT, later Thomas & Betts), USA
- Cooper Lighting division of Cooper Industries, USA
- General Electric, USA
- Osram Sylvania, USA
- Westinghouse Lighting Corporation (formerly Angelo Brothers) division of the new Westinghouse Electric, USA
- Trilux, Germany
- Osram, Germany
- Philips, the Netherlands
- Siemens, Germany
- Svetlina AD, Bulgaria
- Tungsram, Hungary
- Thorn Lighting formerly Europhane, United Kingdom
- GEC, United Kingdom
- Philips, United Kingdom
- AEC Illuminazione, Italy
- Fielding H. Garrison, History of Medicine:
- Scott, S. P. (1904). History of the Moorish Empire in Europe. Philadelphia and London.: J. B. Lippincott Company. p. 3 vols.
Artz, F. B. (1980). The Mind of the Middle Ages (Third revised ed.). University of Chicago Press. pp. 148–50.
"References 1001 Inventions".
- Roskell, J.S. and Clark, L. and Rawcliffe, C. (editors) BARTON, Henry (d.1435), of London. - History of Parliament Online, The History of Parliament: the House of Commons 1386-1421. ISBN 9780862999438. 1993.
- Janet Thomson; The Scot Who Lit The World, The Story Of William Murdoch Inventor Of Gas Lighting; 2003; ISBN 0-9530013-2-6
- "Las fernandinas" (in spanish). Esa Sevilla blogspot. 22 May 2010. Retrieved 19 June 2014.
- ""Ya a la venta el libro "Las farolas fernandinas por los cuatro costados" book review". Amigos de las farolas ferdinandinas. 7 Sep 2009. Retrieved 9 June 2014.
- William H. Workman, The City That Grew (1929) Mirror-Press, Los Angeles, p.
- Fierro 1996, p. 628.
- "Sir Joseph Wilson Swan". home.frognet.net. Retrieved 16 October 2010.
- "Sir Joseph Swan, The Literary & Philosophical Society of Newcastle". rsc.org. 3 February 2009. Retrieved 16 October 2010.
- "Electric lighting". ncl.ac.uk. Retrieved 2014-06-03.
- "Cleveland+ Public Art" (BROCHURE). Positively Cleveland. 2008. p. 3. Retrieved 2009-05-18.
- "Brush Arc Lighting".
- "Timeline of Firsts". Retrieved 2010-01-11.
- Rohrmoser, Guillermo. "Centenario de la electridicad en Costa Rica" (PDF).
- "Marvellous Museums Award". Australian Broadcasting Corporation. ABC Radio National. 2008-11-23. Retrieved 2009-04-12.[dead link]
- General Electric review 23.
- Bullough, John; MS Rea & Y. Akashi (2009). "Several views of metal halide and high pressure sodium lighting for outdoor applications". Lighting Research and Technology. p. 31: 297–320.
- Fotios S, Cheal C. Using obstacle detection to identify appropriate illuminances for lighting in residential roads. Lighting Research & Technology, 2013; 45(3); 362-376
- Rea, M. S.; J. D. Bullough & Y. Akashi (2009). "Several views of metal halide and high pressure sodium lighting for outdoor applications". Lighting Research and Technology. p. 41(4): 297–320.
- Fotios SA & Cheal C, Predicting Lamp Spectrum Effects At Mesopic Levels. Part 1: Spatial Brightness, Lighting Research & Technology, 2011; 43(2); 143-157
- Fotios SA & Cheal C, Lighting for subsidiary streets: investigation of lamps of different SPD. Part 2 – Brightness, Lighting Research & Technology, 2007; 39(3); 233-252
- Fotios S and Goodman T. Proposed UK Guidance for Lighting in Residential Roads. Lighting Research & Technology, 2012; 44(1); 69-83
- Institution of Lighting Professionals (ILP). Professional Lighting Guide PLG03:2012. Lighting for Subsidiary Roads: Using white light sources to balance energy efficiency and visual amenity. Rugby; ILP
- ESCC Highways/Colas Electrical
- "Field Test" (PDF). lrc.rpi.edu. Retrieved 16 October 2010.
- "Lunar resonant streetlights as winner of Metropolis Next Generation Design Prize".
- "Civil Twilight Collective homepage".
- Rea M, Bullough J, Freyssinier-Nova J, Bierman A. A proposed unified system of photometry. Lighting Research & Technology 2004; 36(2):85.
- Goodman T, Forbes A, Walkey H, Eloholma M, Halonen L, Alferdinck J, Freiding A, Bodrogi P, Varady G, Szalmas A. Mesopic visual efficiency IV: a model with relevance to nighttime driving and other applications. Lighting Research & Technology 2007; 39(4):365.
- Peter Morante (January 31, 2008). "Mesopic street lighting demonstration and evaluation final report" (PDF). lrc.rpi.edu. Retrieved 16 October 2010.
- "Driver response to peripheral moving targets under mesopic light levels" (PDF). lrc.rpi.edu. Retrieved 16 October 2010.
- Akashi, Y., M. S. Rea and J. D. Bullough. 2007. Driver decision making in response to peripheral moving targets under mesopic light levels. Lighting Research and Technology 39(1): 53-67.
- Rea MS, Radetsky LC, Bullough JD. Toward a Model of Outdoor Lighting Scene Brightness. Lighting Research & Technology 2010; in press.
- Brons, J. A.; J. D. Bullough & M. S. Rea (2008). "Outdoor site-lighting performance: A comprehensive and quantitative framework for assessing light pollution". Lighting Research and Technology. p. 40(3): 201–224.
- Rea, M. S., J. D. Bullough, C. R. Fay, J. A. Brons, J. Van Derlofske and E. T. Donnell. 2009. Review of the Safety Benefits and Other Effects of Roadway Lighting [report to the National Cooperative Highway Research Program]. Washington, DC: Transportation Research Board.
- Sullivan, J.M., and Flannigan, M.J. (1999) Assessing the Potential Benefit of Adaptive Headlighting Using Crash Databases, Report No. UMTRI-99-21. University of Michigan Transportation Research Institute.
- Schwab, R.N., Walton, N.E., Mounce, J.M., and Rosenbaum, M.J. (1982) Synthesis of Safety Research Related to Traffic Control and Roadway Elements-Volume 2, Chapter 12: Highway Lighting. Report No. FHWA-TS-82-233. Federal Highway Administration.
- Elvik, R. (1995) "Meta-Analysis of Evaluations of Public Lighting as Accident Countermeasure." Transportation Research Record 1485, TRB, National Research Council, Washington, D.C., pp. 112-123.
- Commission Internationale de l'Éclairage. (1992) Road Lighting as an Accident Countermeasure. CIE No. 93. Vienna, Austria: Commission Internationale de l'Éclairage.
- Box, P.C. (1970) Relationship Between Illumination and Freeway Accidents. IERI Project 85-67 Illuminating Research Institute, New York April, pp. 1-83.
- "Lamppost Banners"
- "Lamppost Banner Sponsorship Programs"
- "Stray Voltage Still on the Loose". Scienceline. 2006-08-04. Retrieved 2008-07-19.
- Domingo-Perez, Francisco (February 2013). "Low-rate wireless personal area networks applied to street lighting". Lighting Research & Technology 45 (1): 90–101. doi:10.1177/1477153511431129.
- Nissen, Mayo. "Unseen Sensors: Constantly Sensing but Rarely Seen". Frog Design Mind. Retrieved 9 May 2014.
- van Bommel, Wout (2015). Road Lighting Fundamentals, Technology and Application. Springer. ISBN 9783319114651.
|40x40px||Wikimedia Commons has media related to Street lights.|
- An enthusiast's guide to street lighting - including many close-up photographs of UK street lighting equipment, as well as information on installations through the ages. (UK)
- Example Installation of Integrated Renewable Power in Street Lighting, An example of a street lighting system with integrated solar and wind generator from Panasonic / Matsushita
- Australian Street Lights (an enthusiast site).
- New Streetlights - LED streetlight news in North America.
- Transportation Lighting at the Lighting Research Center
- Lighting Research at the University of Sheffield