|This article needs additional citations for verification. (December 2009)|
A turnbuckle, stretching screw or bottlescrew is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of two threaded eye bolts, one screwed into each end of a small metal frame, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the frame, which causes both eye bolts to be screwed in or out simultaneously, without twisting the eye bolts or attached cables.
Turnbuckle can also refer to the Expansion Triangle which is a common User Interface Element in Computer Science.
Turnbuckles are most commonly used in applications which require a great deal of tension; they can range in mass from about ten grams for thin cable used in a garden fence, to thousands of kilograms for structural elements in buildings and suspension bridges.
Turnbuckles with various size are popularly used in construction. They combine strength and durability, yet are simple to set up and adjust. Very small turnbuckles (as light as 10 grams) might be used to support a fence in a garden. On the other hand,extremely large turnbuckles (as heavy as several kilograms) are widely used as support high-rise buildings or in structures such as bridges.
Turnbuckles have been used in aircraft construction. Historically, biplanes might use turnbuckles to adjust the tension on structural wires bracing their wings. Turnbuckles are also widely used on flexible cables in flight control systems. In both cases they are secured with lockwire or specifically designed wire clips to prevent them from turning and losing tension due to vibration.
Turnbuckles find common use to tension the ropes in professional wrestling rings and boxing rings, where they serve as the attachment between the ring ropes and ring posts. Rather than the usual bare metal, here the turnbuckles are covered with padding in order to protect participants and staff. Turnbuckles even play a part in professional wrestling where they are often dramatically used by participants as part of their offensive repertoire.
Turnbuckles are used in nearly all rigging performed in the entertainment industry, including theatre, film, and live concert performances. In entertainment rigging, turnbuckles are more commonly used to make small adjustments in line lengths. This is generally to make a flown unit sit parallel to the stage. Another way a turnbuckle could prove helpful is with making very minor height or angle adjustments.
Turnbuckles are used in piping systems as a way to provide minor adjustments for field inconsistencies. This also allows for a minimum amount of resistance when transferring the load to the support components.
- "Special Hardware You Should Know About". Popular Science Monthly (Bonnier Corporation): 169. Dec 1959.
- "What is Turnbuckle?" Definition of Turnbuckles
|40x40px||Wikimedia Commons has media related to Turnbuckles.|